User manual GENUIS WG-12PS

[. . . ] English How to use this manual? The game controller is compatible with PC, PlayStation®2 and PlayStation®. For PC users, please refer to section A of "Installation for PC system". For PlayStation®2 and PlayStation®, refer to section B of "Installation for PlayStation®2 and PlayStation®". A. [. . . ] When you finish the calibration and test, you can now play any game. 1 English Connect Game Pad with Receiver 1. Press and hold the Connection/Vibration button of the game pad until the LED flashes. Plug the PlayStation's standard interface of the receiver to the standard port on your game console. Press and hold the Connection/Vibration button of the game pad until the MODE LED flashes in green, then press the button of the receiver to connect with each other. The game controller's function is according to the game software you are using. For details, refer to the game software manual. PlayStation®2 and PlayStation® Function 1. Analog Mode: When the controller is in analog mode, the following buttons and sticks may be operated in analog fashion depending on the features supported by the software title. PlayStation®2 format software Directional buttons / TM buttons / left analog stick / right analog stick / L1, R1, L2, R2, L3, R3 buttons PlayStation® format software Left analog stick / right analog stick / L3, R3 buttons. Digital Mode: When the controller is in digital mode, all function buttons are operated digitally, but the analog sticks will not work. 2 English 3. Vibration function: The game controller features a vibration function when the function is supported by the software title. The vibration function can be set to ON or OFF on the software option screen. The driver will work with the DirectX 7. 0a or a newer version in PC system. Please check the DirectX version on your system, and upgrade if necessary. This game device with radio frequency gives you free action and an enjoyable experience. For optimal performance, place the receiver at least 8 inches (about 20 cm) away from other electrical devices, such as the computer, monitor, and etc. If you feel this game device does not move as smooth as usual, then the batteries have lost their charge, so please replace them. [. . . ] Battery Status of the Receiver LED: When the Low-battery LED is Red, please change new batteries in game pad. Note: The vibration function will be turned OFF automatically in Low Battery Power supply. Condition LED Normal Battery Power Supply Green Light Low Battery Power Supply Red Light 4 [. . . ]