User manual GENUIS VIDEOWONDER DVB

[. . . ] Source: To switch between the different sources DVB -> AV-In -> S-Video 13. Record/Pause: To start and pause the recording of the current program 14. Forward: To go forward through the Playback or Time Shifted Recording 19. Installation of Hardware and Drivers The following sections provide step-by-step instructions on installing and configuring the DVB-T card, accessories and software. 3. 1. [. . . ] If your PC is not ether Windows® 2000 (Service Pack 4) or Windows® XP (Service Pack 1), please go to Microsoft's website (http://www. microsoft. com) to upgrade your Windows version of Service Pack 4 for Windows® 2000 or Service Pack 1 for Windows® XP by the Internet. This is an example for checking the version of Windows 2000. English If you have not already done so, place the Installation CD into your CD-ROM drive. Then select the "Install from a list or specific location (Advanced)" item and click "Next". Now select "Search for the best driver in these locations. " item and click "Next". Windows will now find the drivers on the Installation CD and install them automatically. After installing the driver, Windows will inform you that it has done so successfully. This completes the installation of the drivers and you can now start installing the application program. 4. Installation of Genius DTV (Digital TV) The installation of the Genius DTV software can be carried out by using either the Auto start program of the provided Driver and Application CD ("Software Installation"), or by executing a single file if you have downloaded the program from the Internet. If the Auto start program does not appear automatically when you insert your Genius Installation CD, start it manually by running the "InstallCD. exe" file located on the Genius Installation CD. English 4. 2. Scanning for TV Channels Before you can watch Digital TV, you have to scan for available channels in your area. To access the Scan Button click in the Window title bar on Tools -> Scan Receiving Setup: Click on terrestrial scanning, so you can enter the minimum and maximum frequency area that can be scanned for channels. Channel Scan: You have two possibilities to scan for available channels: 1. Auto Scan: From the Drop-Down field you can select your country Button. During the Auto Scan, you will see the above picture showing you the actual status. Transponder Scan: English If you have already successfully scanned for channels and you want to add another frequency manually, type in the section for Transponder Scan the frequency in kHz, and the modulation (for DVB-T 16QAM or 64QAM in most cases) and press the Button again. The found channels are displayed in the window, with additional information of TID, SID, Video PID and Audio PID. Here you also have the possibility to save your frequency list, and to import it again. After the scan, click on "Ok" you should have a similar screen as follows 4. 3. Receiving DVB-T (Digital Video Broadcasting-Terrestrial) On the right side, you will find all scanned and saved channels, which you choose by double-clicking on it. Here you will find a drop down menu, where you can select which kind of transmission you want to see: You can choose between TV (Free) Channels, scrambled channels - TV (CA-Conditional Access)* or Radio. English *To receive scrambled channels you need a subscription from your broadcaster 4. 4. Choosing your source Your Video Wonder DVB-T Card is not only limited to receive Digital signals, you can also switch to a different analogue source. On the left side you will find a button with an arrow pointing to the left. By clicking this button, a sidebar will open to access different video sources. You can choose between: AV in; S-Video; DVB; PIP; Scan; Play; Swap To switch to an external device connected to the AV-In Input (yellow) To switch to an external device connected to the S-Video Input To watch Digital Terrestrial TV (selected by default) To watch a second analog source while watching digital terrestrial TV To access the scan settings For playback of recorded files Swaps video between main window and second window (in PIP mode) English 5. Settings To access the Setting Dialog click in the Window title bar on Tools -> Settings Depending on your Source, you have several possibilities to customize your settings. 5. 1 DVB Mode 5. 1. 1. [. . . ] Click on the "Add" Button, and can add a new scheduled recording. The "Delete" Button cancels the highlighted scheduled recording and the "Edit" Button gives you the option of change the settings of a scheduled recording The "Add" and "Edit" Buttons open a second menu Choose whether you want to add a recording one time only, or do the same recording on different days for the same channel. From the Drop-Down Menu, select the desired channel, choose the date and the start time, the duration of the recording and give the Schedule Recording a specific name. By clicking on the "Add" Button, the settings are saved to the Schedule List. 8. 3 The TimeShift Button English With the TimeShift function, you can pause live TV, leave, and come back and watch your program right where you left it. [. . . ]