User manual GENUIS TWINWHEEL

[. . . ] ENGLISH How to use the manual? The game controller is compatible with PC, PlayStation®2 and PlayStation®. For PC users, please refer to the section A of "Installation for PC system". [. . . ] Click Start / Settings / Control Panel and double click on the "Game controller" or "Gaming Options" icon. Attach the racing wheelbase to a sturdy tabletop, or a similar surface. Then use the suction cups on the wheelbase and the C-clamps to secure the wheel to the tabletop. Place the pedals on the floor in a convenient-to-reach location and not on an easy-to-slip surface. In the "Game controller" or "Gaming Options" screen, you can calibrate and test your game controller before you play any game. When you finish the calibration and test, you can now play any game. Important: 1. The driver will work with the DirectX 7. 0a or a newer version in PC system. Please check the DirectX version on your system, and upgrade if necessary. 1 ENGLISH 2. Plug the PlayStation's standard interface cable to the Play Station. The game controller's function is according to the game software you are using. For details, refer to the game software manual. PlayStation®2 and PlayStation® Function 1. Analog Mode: When the controller is in analog mode, the following buttons and sticks may be operated in analog fashion depending on the features supported by the software title. PlayStation®2 format software Directional buttons / , , , buttons/ L1, R1, L2, R2, L3, R3 buttons. Digital Mode: When the controller is in digital mode, all function buttons are operated digitally. [. . . ] Note1:The Program function only can be activated under Digital & Analog modes. Under Car mode, the Program function will not be activated. ) Note2: To terminate the programmed functions, unplug the wheel's cable and re-plug it to the PS2 console, and the programmed function will be reset. 3 [. . . ]