User manual FLYMO SABRE CUT

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual FLYMO SABRE CUT. We hope that this FLYMO SABRE CUT user guide will be useful to you.


FLYMO SABRE CUT : Download the complete user guide (1835 Ko)

You may also download the following manuals related to this product:

   FLYMO SABRE CUT (2211 ko)
   FLYMO SABRE CUT (2211 ko)
   FLYMO SABRE CUT (2211 ko)
   FLYMO SABRE CUT (2211 ko)
   FLYMO SABRE CUT (2211 ko)
   FLYMO SABRE CUT (2211 ko)
   FLYMO SABRE CUT (2211 ko)
   FLYMO SABRE CUT (2211 ko)

Manual abstract: user guide FLYMO SABRE CUT

Detailed instructions for use are in the User's Guide.

[. . . ] Do not operate in the rain or leave the product outdoors while it is raining. Remove plug from Power Pack before adjusting, cleaning or if cable is damaged. Warning:- This product has not been designed to provide protection from electric shock in the event of contact with overhead electric lines. [. . . ] Whilst using the Hedgetrimmer always be sure of a safe and secure operating position. Keep hands and feet away from the cutting means at all times and especially when switching on the motor. Remove the plug from the Power Pack:- before leaving the Hedgetrimmer unattended for any period; - before clearing a blockage; - before checking, cleaning or working on the appliance; - if you hit an object. Do not use your Hedgetrimmer until you are sure that the entire Hedgetrimmer is in a safe operating condition; - if the Hedgetrimmer starts to vibrate abnormally. Keep all nuts, bolts and screws tight to be sure the product is in safe working condition. Be careful during adjustment of the Hedgetrimmer to prevent entrapment of the fingers between moving blades and fixed parts of the machine. After use the product should be stored using the blade cover provided. Husqvarna Outdoor Products are manufactured under an Environmental Management System (ISO 14001) using, where practical, components manufactured in the most environmentally responsible manner, according to company procedures, and with the potential for recycling at the end of the products' life. Awareness of the environment must be considered when disposing of `end-of-life' product. If necessary, contact your local authority for disposal information. The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council office, your household waste disposal service or the shop where you purchased the product. Your product is uniquely identified by a silver and black product rating label. We strongly recommend that your product is serviced at least every twelve months, more often in a professional application. [. . . ] Genom att se till att denna produkt omhändertas ordentligt kan du hjälpa till att motverka potentiella negativa konsekvenser på miljö och människor, vilka annars kan orsakas genom oriktig avfallshantering av denna produkt. DL5 6UP Certify that a sample of the above product has been tested using directive 81/1051/EEC as a guide. The maximum A-weighted sound pressure level recorded at operator position under free field semi anechoic chamber conditions was :I, the undersigned M. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE FLYMO SABRE CUT




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual FLYMO SABRE CUT will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.