User manual ENERMAX UCAP12

[. . . ] Please read this manual carefully and follow its instructions before installing the PSU. We would like to draw your attention that a computer required very specific conditions to work best for you without failing. To avoid failures and to increase lifetime of the system, we suggest that: Your system is NOT located near a radiator or any other heat producing device Your system is NOT located near a magnetic device Your system is NOT located in a moist and/or dusty and/or vibrating environment Your system is NOT exposed to direct sunshine Your system is sufficiently cooled by additional fans If you use AC extension cables, please make sure it can support all connected appliances' potential peak power draw. Or redistribute other high power consumption equipment, such as laser printers or monitors to other AC wall outlets. [. . . ] Exceeding the extension cable's loading capacity could trigger its circuit breaker and cut off the power. If you want to add the UPS (Uninterruptible Power Supply) for your system, please choose adequate Watts/VA capacity UPS. * If you intend to add other appliance powered by the same UPS, such as monitor or printer, please use higher capacity UPS according to all connected devices' rated power draw. * Please do not mistake VA capacity as Watts, or use insufficient power UPS. This would result in less UPS battery runtime or the inability to power the system in battery mode. 8 This PSU does not support MB with ISA expansion slot, which might need -5V power. When the system is turned off, or goes into ACPI S3/S4 sleep mode, the PSU fan will keep dissipating the remaining heat for 30 ~ 60 seconds and prolonging system lifetime. #2 When assembling or maintaining the system, please remove AC cord from AC inlet, or turn ON/OFF switch into "OFF" position, and wait PowerGuard LED light off. The ENERMAX CordGuard lock can fix your AC cord tightly to the PSU, so that it will not be easily detached and avoid shut-downs of your PC. If you connect the PSU FM connector on the MB, but BIOS or system monitor software cannot read the PSU fan RPM, please relocate the PSU FM connector to another socket. Third party cables might not be compatible and might cause damage to your PSU and/or system, and use of third party cable shall void PSU warranty. 0 Modular cable for 1 or 2 performance PCI Express graphic cards, which needs 6P or 8P PCI-E connector. eMC017: 4 x SATA drives Modular cable for SATA/SAS drives like ODD and HDD. EMC018: 8P & 4P +12V CPU/RAM power (optional) Modular cable to support special heavy-duty workstation/server with more than 4 CPUs and 16 RAMs. Supplied modular cables might differ by models and in different region. Com Special note for System Integrators: If your system requires special modular cable configuration or design, please contact an ENERMAX sales representative. Detaching the modular cable from PSU 5-pin / 12-pin connector on modular cable has two hooks to lock with the PSU's modular sockets. When unplug the modular cable from PSU, please press two hooks together and gently pull out the cable. [. . . ] Detaching the modular cable from PSU 5-pin / 12-pin connector on modular cable has two hooks to lock with the PSU's modular sockets. When unplug the modular cable from PSU, please press two hooks together and gently pull out the cable. Turn on the PSU by switching the ON/OFF switch to "ON", and your system is ready. In case of abnormal situations, the power supply will automatically turn off to avoid potential danger to itself and other system components. [. . . ]