User manual ELECTRO-VOICE X-LINE PRODUCTS BROCHURE

[. . . ] Mirror-image versions of the Xvls, Xvlt and Xsub systems are not required because they can simply be turned upside down to create a mirror image. The Xvls, Xvlt, Xfil1 and Xfil2 are only available with internal rigging hardware, while the Xsub is available either with or without rigging hardware. X-LineTM Loudspeaker Flying Summary The X-Line line-array loudspeaker systems are typically hung in a straight line. [. . . ] Again there are two pieces of rear rigging hardware and two pieces of front rigigng hardware required for this purpose. Attaching the Downfill at the Bottom: The third set of rigging is used to attach the Xfil1 or Xfil 2 to the bottom of the column of loudpeakers. As before, there are two pieces of rear rigging hardware and two pieces of front rigging hardware required for this purpose. This hardware will work for attaching the Xfil1 or Xfil2 to either the Xvls or Xvlt enclosures. (Note that the Xvhl linking hinge is the same hardware used to link Xvls or Xvlt systems together; however, the Xvsd chain strap at the front is different. ) The Xvhg, Xvhl, Xvsg, Xvsl and Xvsd rigging assemblies are all manufactured and sold by EV/Telex. EV/Telex does not manufacture or sell grids; however, the EV/Telex engineers have worked with ATM Flyware (a third-party company which specializes in rigging hardware for the professional loudspeaker industry) to develop a grid for the X-Line loudspeakers that ATM will sell direct to our customers. X-LineTM Loudspeaker & Rigging Packages Special loudspeaker/rigging sales packages have been created that include one flying Xvls, Xvlt, Xfil1, Xfil2 or Xsub loudspeaker and all external rigging required to link two boxes together. For the flying Xvls, Xvlt and Xsub, that includes one loudspeaker, two Xvsl front chain assemblies and two Xvhl rear hinge assemblies. For the Xfil1 and Xfil2, that includes one loudspeaker, two Xvsd front chain assemblies and two Xvhl rear hinge assemblies. All orders for customers should be placed for these packages and not for the individual loudspeakers without rigging. The customers should be reminded that these rigging packages only include the linking rigging hardware and not the hardware required to attach to the grid. Therefore, the customers should be reminded that they additionally need to place orders for that grid hardware (two Xvsg front chain assemblies per column of loudspeakers and either two Xvhg flexible chain rear hinge assemblies or two Xvhl solidarm rear hinge assemblies per column of loudspeakers). Furthermore, because rigging can be misplaced or lost in the field, customers should be encouraged to place orders for a few pieces of spare rigging (Xvhl, Xvhg, Xvsl, Xvsd and Xvsg). Pro Audio Group · Telex Communications Inc. · 12000 Portland Ave South · Burnsville, MN 55337 USA · Tel: 952-884-4051 · Fax: 952-887-9212 www. electrovoice. com X-LineTM Accessories Three different dollies are available for the X-Line loudspeaker systems: The Bottom Stacking Dolly may be used to transport four Xvls or four Xsub rectangular enclosures. This dolly makes moving in and out of a venue quick and easy because four enclosures can be stacked and transported on a single dolly with all of the rigging hardware attached. [. . . ] · 12000 Portland Ave South · Burnsville, MN 55337 USA · Tel: 952-884-4051 · Fax: 952-887-9212 www. electrovoice. com Xfil1 & Xfil2 FULL-RANGE DOWNFILL LOUDSPEAKER SYSTEMS Note: The Xfil1 and Xfil2 are Mirror Image - One of Each is Required for a Stereo System Configuration: 3-Way Active Crossover Frequencies: 220Hz & 1250 Hz Nominal Coverage Pattern: 120H x 40V HF Section: Drivers - Two ND5-16 16-ohm Compression Drivers Horn - 120H x 40V Long-Term Power Rating - 150 watts total (75 watts each) Nominal Impedance - One 8. 0-ohm load MB Section: Drivers - Two ND08 16-ohm Midbass Drivers Long-Term Power Handling - 600 watts total (300 watts each) Nominal Impedance - One 8-ohm Load LF Section: Drivers - Two EVX155 8-ohm Woofers Drivers Long-Term Power Handling - 1200 watts total (600 watts each) Nominal Impedance - Two 8-ohm Loads Wiring Configuration: Two Paralleled 8-Pin Neutrik NL8 Connectors Pins 4: HF (8. 00 ohms, 150 watts) Pins 3: MB (8. 00 ohms, 600 watts) Pins 2: LF2 (8. 00 ohms, 600 watts) Pins 1: LF1 (8. 00 ohms, 600 watts) System Weight: 215 lbs Enclosure Dimensions: 49. 000 in. deep Enclosure Shape: 20-Degree Downward Slant Front Rigging: Proprietary Hinge on Back, Proprietary Adjustable Chain on Front Xsub F FLYING SUBWOOFER LOUDSPEAKER SYSTEMS Configuration: Active Crossover with Full-Range Systems Crossover Frequencies: 80Hz SUB Section: Drivers - Two EVX180B 8-ohm Woofers Drivers Long-Term Power Handling - 1200 watts total (600 watts each) Nominal Impedance - Two 8-ohm Loads Wiring Configuration: Two Paralleled 8-Pin Neutrik NL8 Connectors Pins 4: no connection Pins 3: no connection Pins 2: SUB2 (8. 00 ohms, 600 watts) Pins 1: SUB1 (8. 00 ohms, 600 watts) System Weight: 202 lbs Enclosure Dimensions: 49. 000 in. [. . . ]