User manual ELECTRO-VOICE ULM21 EDS

[. . . ] [. . . ] The ULM-21 condenser element provides clear and natural sound reproduction, minimizing wind noise and popping with use of the supplied windscreen. Technical Specifications: Generating Element: Back Electret Condenser Polar Pattern: Cardioid Open Circuit Sensitivity: -52 dB (re: 1V/Pa) @ 1 kHz Impedance: 1000 ohms ± 20% @ 1 kHz Self Noise: 29 dBA Frequency Response: 80 Hz ~ 16 kHz Signal to Noise: 65 dB @ 1 Pa Standard Operating 1. 5V Voltage: Maximum Input SPL: 120 dB @ 1% THD Dynamic Range: 91 dB Cable: 40" (1016mm) Cable Type: Single Conductor/Shielded Connector: TA4F Dimensions: 18mm x 7. 4 mm/. 71 in. (without cable) Accessories: Metal Windscreen (Included) RWS-013 Tie Clip (Included) Frequency Response: Polar Response: (5 dB per division) 1000 Hz Dimension Drawing: TA4F Connector TA4F Wiring: Mic Ground V+ Mic Signal Jumper ULM-21 Part Number: ULM21 12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952/884-4051, Fax: 952/884-0043 www. electrovoice. com © Telex Communications, Inc. For customer orders, contact Customer Service at: 800/392-3497 Fax: 800/955-6831 Europe, Africa, and Middle East only. For customer orders, contact Customer Service at: + 49 9421-706 0 Fax: + 49 9421-706 265 Other International locations. [. . . ] [. . . ]