User manual ELECTRO-VOICE TOUR GRADE AMPLIFIERS SELL

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ELECTRO-VOICE TOUR GRADE AMPLIFIERS SELL. We hope that this ELECTRO-VOICE TOUR GRADE AMPLIFIERS SELL user guide will be useful to you.


ELECTRO-VOICE TOUR GRADE AMPLIFIERS SELL : Download the complete user guide (492 Ko)

Manual abstract: user guide ELECTRO-VOICE TOUR GRADE AMPLIFIERS SELL

Detailed instructions for use are in the User's Guide.

[. . . ] · Up to 2 x 3500W Maximum Continuous Output · High Efficiency and Sonic Excellence through Grounded-Bridge Class-H Design · Microprocessor Controlled - Compound Thermal Protection - Auto Mains Input Voltage Select - Mains Circuit Breaker Supervision · Front LCD-Panel for Operation Mode Set-up and Monitoring · Slot for Optional IRIS-NetTM Module - Complete PC Control (CAN, Ethernet) - State-of-the-art Real Time DSP (RCM26/28) - Unique System Diagnostics and Supervision - Compatible with all other IRIS-Net Compatible Hardware · Complete Protection Package · Only 14. 5 kg (32 lbs) for TG-7 · Designed and Manufactured in Germany Tour Grade amplifiers are designed for today's most demanding audio applications. [. . . ] There will be several modules available: RCM-26 (DSP, AES/EBU input, GPIO, CANBus), RCM-28 (DSP, GPIO, COBRA-NetTM), RCM-20 (no DSP, CAN-Bus) to allow any combination of central control and supervision with central or decentralized signal processing. Connection to a PC running IRIS-Net software can be achieved using a UCC-1 USB-CAN interface and/or a N8000 digital matrix. RCM-26 DSP Module · 2-in-2 Speaker Controller with IIR and Linear Phase FIR Filters · 96 kHz Sample Rate, 116 dB Dynamic Range · 24 Bit Linear AD/DA, AES/EBU In/Out · 2 GPIO's, RS232 Interface, CAN-Bus · 300 MIPS Processing Power for Real Time DSP Editing and Zero-Latency FIR Filers Specifications Max. Midband Output Power THD=1 KHz, 1 kHz, Dual Channel TG-5 1900 W 1450 W 850 W -1200 W 600 W · Unique System Supervision and Diagnostiocs (Load Monitoring and Additional impedance Measurements - System Check) · Total Control Through IRIS-Net Software · Compatible with all IRIS-Net Capable Devices: RCM24 (DSP controlled Precision Series Amplfiers) NetMax® N8000 Max. Rated Output Power THD , 0, 1%, 20 Hz - 20 kHz Max. Single Channel Output Power Dynamic Headroom, IHF-A Max. Bridged Ouput Power THD = 1%, 1 kHz 2 4 8 2 4 8 2 4 8 2 4 8 TG-7 3500 W 2500 W 1500 W -2100 W 1050 W 4500 W 3200 W 1800 W 7000 W 5000 W 125V 10 Hz - 50 kHz PA#20673 Maximum Voltage Swing THD1%, 1 kHz Power Bandwidth THD = 1%, ref. 1 kHz Input Sensitivity (rated power @8 ) THD at rated output power IMD-SMPTE (60 Hz, 7 kHz) DIM30 (3, 15 kHz, 15 kHz) Max. Input Level Crosstalk (1 kHz, rated output power) Frequency Response (ref. 1 kHz) Input Impedance Damping Factor (1 kHz) Slew Rate S/N Ratio (A-weighted, 32 dB gain) Output Noise, A-weighted Output Stage Topology Power Requirements Power Consumption 1/8 max. [. . . ] 317, Xianxia Road, Shanghai, China, PC: 200051 Phone: +86 21-6235-1677 Fax: +86 21-6235-1676 [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ELECTRO-VOICE TOUR GRADE AMPLIFIERS SELL




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ELECTRO-VOICE TOUR GRADE AMPLIFIERS SELL will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.