User manual ELECTRO-VOICE SL12-2V EDS

[. . . ] The sleek black-vinyl enclosure with a black cloth grille attached with four screws has been to blend into most interior design concepts. A third-order (18-db-per-octave) crossover at 1, 600 Hz is used to combine the two frequency sections and provide the system equalization while achieving the best directivity response both on and off axis. Frequency Response The SL12-2V axial frequency response was measured in Electro-Voice's large anechoic chamber at a distance of 10 feet with a swept sine-wave input , corrected to 1 watt 1 Meter (see Figure 4). [. . . ] Suspending the SL12-2V The SL12-2V was designed to be mounted in a variety of ways using a variety of mounts. There are three 5/16-18 diameter holes left and right for horizontal or vertical mounting using ALLEN PRODUCTS COMPANY INC. (2-1100C Bracket) and four rear 1/4-20 mounting holes using ALLEN PRODUCTS COMPANY INC. (MultiMountTM-24) The SL12-2V is also equipped to accommodate Acoustic Sound Products, Isolation mounts. Architects' and Engineers' Specifications The loudspeaker system shall be a twoway, 15° slanted baffle design, full-range system consisting of a 12-inch woofer, a 100° x 90° horn and compression driver, using a passive crossover network installed in a black vinyl-clad V-folded particle board enclosure with a black cloth grille. The system shall have a crossover point of 1, 600 Hz and have a nominal impedance of 8 ohms. Sensitivity shall be an average of 93dB for a 1 watt input at a distance of 1 meter on axis. Long term power capacity shall be at least 200 watts, based on ANSI/EIA RS-426-A 1980 standard for full-range loudspeaker systems. 2 SL12-2V High-Output, Two-Way Slant Cinema Surround Speaker System Input connections shall be #10 screw terminals on a barrier strip. A shorting jumper shall be present to allow the ISO 2969 or "flat" response to be selected. (See figure 2) Suspension of the system shall be achieved through the use of ALLEN PRODUCTS COMPANY INC. (2-1100C Bracket) for horizontal mounting, or ALLEN PRODUCTS COMPANY INC. Overall dimensions shall be no greater than (53. 52 cm) 21. 07 inches high by (47. 63 cm) 18. 75 inches wide and a maximum depth of (33. 5 cm) 13. 2 inches Net weight shall be (21. 3 kg) 47. 0 lb. Uniform Limited Warranty Statement Electro-Voice products are guaranteed against malfunction due to defects in materials or workmanship for a specified period, as noted in the individual productline statement(s) below, or in the individual product data sheet or owner's manual, beginning with the date of original purchase. If such malfunction occurs during the specified period, the product will be repaired or replaced (at our option) without charge. [. . . ] The SL122V is also equipped to accommodate Acoustic Sound Products, Isolation mounts. Material: V-folded black vinyl-clad particle board with a Black cloth Grille. SL12-2V High-Output, Two-Way Slant Cinema Surround Speaker System Input Connectors: (See Figure 2) #10 screw terminals for Input and Jumper selectivity for Flat or ISO response. Dimensions Bass: (See Figure 2) Height: (53. 52 cm) 21. 07 in Width: (47. 63 cm) 18. 75 in. [. . . ]