User manual ELECTRO-VOICE REV WIRELESS BROCHURE

[. . . ] Microphone choices include: -- N/DYM® 767a, N/DYM 967, RE-410, RE-510 · · · · · Backlit LCD display controlled by three buttons mounted out of harm's way inside the battery compartment. RF transmit power and audio gain are controlled from the LCD screen controls, no tools required. Two AA batteries power the REV-H for over ten hours of continuous use. [. . . ] New ClearScanTM Analyzer mode allows you to sweep the entire band and display the results like a frequency analyzer. Compatible with IRIS-NetTM audio networking software so you can monitor your wireless microphones on the same network as your EV remote amplifiers. Software is included on CD-ROM with every REV receiver and updates are available at no charge on the EV website www. electrovoice. com. · · · · · Customers also asked for the seamless integration of large numbers of wireless systems. Factory set channel groups allow up to 16 systems to operate simultaneously in one frequency band. Programmable in 25 kHz steps across 24 MHz operating bandwidth, there are over 950 possible channels so you can always find a clear channel. Advanced ClearScanTM automatic group and channel selection allows quick, simple setup in crowded RF environments, which mitigates stress in critical, real-world production situations. single & dual receiver · Optimized analog audio path developed to provide the truest representation of a wired microphone sound possible in a wireless system. REV-LinkTM PC software for remote monitoring, control and programming over a CAN bus connection through a UCC-1 converter or Netmax N8000. Factory set channel groups allow up to 16 systems to operate simultaneously in one frequency band. For groups up to 44 systems, EV can help with the coordination and custom groups are easily programmed. Programmable in 25 kHz steps across 24 MHz operating bandwidth, there are over 950 possible channels so you can always find a clear channel. Advanced ClearScanTM, automatic group and channel selections, allows quick, simple setup. Backlit LCD Display shows the Sound Engineer the Group/Channel, transmitter battery status, diversity operation, RF and Audio level meters, and space for a custom name REV-D Dual Receiver includes antenna pass through jacks so up to six receivers can be connected to just two antennas. Specially designed "Sound Check" mode provides the ability for one person to walk test the microphone in the performance space with tangible results. Patented DSP Posi-PhaseTM Diversity System for maximum range and audio quality. [. . . ] EV can. " -- Jeremy Smith, FOH engineer [GWAR] "Night after night I rely on the RE-1 to perform. Now, after hearing and using the REV, I have to say that I'm floored by how great it sounds. Right on, guys!" -- Steve "Sonny" Taylor, FOH engineer [Neal McCoy] "George Clinton abuses wireless. [. . . ]