User manual ELECTRO-VOICE PA2250T EDS

[. . . ] PA2250T Two-Channel Power Amplifier Key Features: · · · · · · · · · · 2 x 270W at 70V or 270W at 4 Ohms 2 U Rack Space Chassis Stepped Rear Level Controls Bridge Mode Operation Provides 1 x 540W at 8 ohms Complete Protection Package Selectable 50Hz or 300Hz Hi-Pass Filter for each Channel Phoenix Type Inputs Phoenix Type Outputs High Efficiency Circuit Design Front Panel Power On/Off Technical Specifications: Number of Channels Rated Output Power (*Rated Load) THD<1%, 1kHz Rated Output Power (*Rated Load) THD<0. 2%, 20Hz. . . 20kHz Slew Rate at 1kHz Frequency Response, -1dB, Ref. [. . . ] Complete protection is provided for high temperature, audio limiters, power up delay and peak current limiters. In addition to the rated output power, the PA2250T provides excellent headroom for a wide dynamic range on music signals. The onboard dynamic limiter ensures that the output clipping of the PA2250T will not generate excessive distortion. Marked level controls on the rear panel provide hidden reliable level adjustments for each channel. Phoenix type connectors for inputs and outputs provide an easy rack wiring. Damping factor, at 100Hz / 1kHz, 4 Ohm Power Bandwidth THD=1%, Ref. 20kHz, Balanced Signal-to-Noise Ratio, A-Weighted Input Sensitivity at Rated Output Power or Voltage, 1kHz THD at rated output power, MBW=80kHz, 1kHz IMD-SMPTE, 60Hz, 7kHz DIM30, 3. 15kHz, 15kHz Crosstalk, Ref. [. . . ] For customer orders, contact Customer Service at: + 1 952 884-4051 Fax: + 1 952 736-4212 For warranty repair or service information, contact the Service Repair department at: 800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO Specifications subject to change without notice. [. . . ]