User manual ELECTRO-VOICE MA-606 EDS

[. . . ] MA-606 Mixer Amplifier 60-Watt, 6 Input Mixer Amplifier Key Features · · · · · · · Balanced Microphone or Line Level Inputs All Available with 24V Phantom Power. [. . . ] A preamplifier output jack and power amplifier input jack permit the mixed output to be fed to an external signal processor (graphic EQ or compressor), and then returned to the built-in amplifier. The preamp output may be used to drive an additional power amp with its own set of speakers without interrupting the function of the built-in amplifier. There is also a 24v dc power option to operate the unit off of a 24v emergency power source. The speaker output is available at a barrier strip, which includes terminals for driving low impedance loudspeaker loads, as well as 25, 70. 7 or 100 volt distributed systems. Architects'andEngineers'Specifications: The mixer amplifier shall have six input channels, with individual mix gain controls. Input channels 1 through 4 shall be configured for either low-Z balanced microphone operation or hi-Z line level signals via switches on the rear panel. The mute circuit shall be defeatable using a switch on the rear panel. Inputs 1 - 4 shall be available via combination female XLR / ¼" connectors. If a stereo source is connected, it shall be properly mixed to mono via a resistor network mounted on the input plate. [. . . ] For customer orders, contact Customer Service at: + 1 952 884-4051 Fax: + 1 952 736-4212 For warranty repair or service information, contact the Service Repair department at: 800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO Specifications subject to change without notice. [. . . ]