User manual ELECTRO-VOICE EVID 62 EDS

[. . . ] Model 6. 2 Extended Range High Output Speaker Key Features: · · · · · · Line-array enhanced coverage control Organic, unobtrusive shape Strong-Arm-MountTM for easy, flexible aiming Full-bandwidth overload protection Weather resistant - Conforms to Mil Spec 810 and IEC 529 IP 34 Dual 6-inch LF transducers for extended bass and greater power handling and output Ti direct-radiator HF transducer, Neodymium structure High sensitivity Magnetically shielded Zinc-plated grilles Transformer Versions · · · · · Technical Specifications: Frequency Response 1(-10 dB) Power Handling Sensitivity 3 2 62 Hz - 20 kHz 150W Cont. /600W Peak 94 dB, 1W/1m 8 ohms 118 dB Impedance Max SPL Horizontal Coverage Ver tical Coverage 4 4 General Description: The EVID 6. 2 is an extended-range loudspeaker ideal for indoor and outdoor applications requiring high-quality sound. [. . . ] Transformer versions are also available for constant voltage systems. 100° 80° 1. 6 kHz 2 x 6" (100 mm) 1" (25 mm) Full System Meets Mil Spec 810 humidity, salt spray, temperature and UV, and IEC 529 IP 34 splashproof ratings 100° x 90° Spring ABS (paintable) 70V: 7. 5 W 70V/100V:15W, 30W, 60W 16. 5" x 9" x 11. 75" (419 mm x 228 mm x 298 mm) 12 lbs (5. 3kg) 27 lbs (12. 3 kg) SAMTM, hex key Crossover Frequency LF Transducer HF Transducer Protection Weather Resistance Swing x Rotation Terminals Enclosure Material "t" Version Wattage Taps Dim (H x W x D) Net Weight (each) Shipping Weight (pair) Included Accessories 1 2 Half Space (wall mounting) Long Term Program Rating: 3 dB greater than continuous pink noise rating 3 Avg: Half Space (wall mounting) 4 When mounted with long axis in ver tical plane Architecture & Engineering Specs: The loudspeaker shall be a two-way system consisting of two 6" (152mm) low-frequency transducers, a 1" (25mm) high-frequency transducer with a Coherent Coverage Waveguide, and a frequency-dividing network installed in a vented, line-array enclosure. The network shall include a passive limiter for both the low-frequency and high-frequency transducers. The loudspeaker system shall meet the following performance criteria: Power handling, 150-Watts of EIA RS-426A continuous pink noise (6 dB crest factor); Frequency response, 62 Hz - 20 kHz (-10 dB from rated sensitivity); Pressure sensitivity, 94 dB at one watt, 200 Hz -10 kHz at one meter; Impedance, 8 ohms nominal, 6 ohms minimum. The high-frequency transducer shall drive a waveguide to cover evenly 100° horizontally by 90° vertically. The enclosure shall be 16. 5" (419mm) high, 9" (228mm) wide, 11. 75" (298mm) deep. The grille shall be zinc plated, powder coated for corrosion resistance, and restrained with a safety leash. [. . . ] For customer orders, contact Customer Service at: + 1 952 884-4051 Fax: + 1 952 736-4212 For warranty repair or service information, contact the Service Repair department at: 800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO Specifications subject to change without notice. 12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952/884-4051, Fax: 952/884-0043 www. electrovoice. com © Telex Communications, Inc. [. . . ]