User manual ELECTRO-VOICE CPSM EDS

[. . . ] CPSM Shock-Mount Kit for CP212 and CP218 Microphones · Virtually eliminates mechanically transmitted noise from the mounting surface · More than 15 dB of mechnical shock isolation at 200 Hz · Provides theft-resistant mounting of CP212 and CP218 microphones · Mounts in panels up to 11/2 inches thick Description The CPSM shock-mount kit is a permanent mounting accessory providing shock isolation for the CP212 and CP218 podium microphones. [. . . ] Insert the set screw into the tapped hole in the steel sleeve and tighten, securing the microphone in the shock mount. Align the shock mount with the three drilled holes. Secure the assembly to the panel by screwing in the three remaining wood screws. Architects'and Engineers' Specifications The shock mount shall have a minimum of 15 dB of shock isolation at a frequency of 200 Hz in the vertical axis. Dimensions shall be 2. 06 inches (52. 32 mm) diameter and 1. 29 inches (32. 77 mm) high. The shock mount shall have a nonreflecting black polycarbonate plastic outer flange that fits into a hole of 13/8 inches (39. 4 mm) in diameter and is secured to a desk top by three screws; two butyl rubber shock mounts; and a nickel-plated steel inner sleeve that captures the microphone and acts as a theft-resistant security device. Limited Warranty Electro-Voice products are guaranteed against malfunction due to defects in materials or workmanship for a specified period, as noted in the individual product-line statement(s) below, or in the individual product data sheet or owner's manual, beginning with the date of original purchase. If such CPSM/Shock-Mount Kit for CP212 and CP218 Microphones malfunction occurs during the specified period, the product will be repaired or replaced (at our option) without charge. Exclusions and Limitations: The Limited Warranty does not apply to: (a) exterior finish or appearance; (b) certain specific items described in the individual product-line statement(s) below, or in the individual product data sheet or owner's manual; (c) malfunction resulting from use or operation of the product other than as specified in the product data sheet or owner's manual; (d) malfunction resulting from misuse or abuse of the product; or (e) malfunction occurring at any time after repairs have been made to the product by anyone other than ElectroVoice Service or any of its authorized service representatives. [. . . ] Specifications Construction: Polycarbonate plastic shock mount with a nickel-plated steel sleeve insert; mounting flange top surface finished in non-reflecting black Recommended For: CP212 and CP218 podium microphones Maximum Panel Thickness: 11/2 inches (38. 1 mm) Dimensions, Height: 1. 29 inches (32. 77 mm) Width: 2. 06 inches (52. 32 mm) Net Weight: 1. 21 ounces (34. 35 grams) Shipping Weight: 2. 81 ounces (79. 55 grams) CPSM/Shock-Mount Kit for CP212 and CP218 Microphone FIGURE 1 --Shock and Vibration Isolation of the CPSM Shock Mount (Microphone output referenced to 1 g acceleration at 200 Hz) 600 Cecil Street, Buchanan, MI 49107 616/695-6831, 616/695-1304 Fax ACCESSORIES--Shock Mount Kit ©EVI Audio 1999 · Litho in U. S. A. [. . . ]