User manual ELECTRO-VOICE CP2200 EDS

[. . . ] CP2200 High-Efficient, Lightweight Two-Channel Power Amplifier Key Features: · · · · · · 2 x 1, 100W/ 2 Ohms High Efficient Class-H Design 2 U Rack Space Only 35 lbs (16 kg) Complete Protection Package Dynamic Limiter General Description: The Electro-Voice® CP2200 is from the compact and lightweight Compact Precision Series of professional amplifiers. [. . . ] In addition to the rated output power the CP2200 provides up to 30% percent headroom for a wide dynamic range on music signals. The onboard dynamic limiter ensures, that the output clipping of the CP2200 will not exceed a THD of 1% up to an input signal of +21dBu. Paralleled male and female input XLRs provide an easy rack wiring. Maximum Bridged Output Power 2200W, 1600W 4, 8 Ohms: (THD = 1% , 1 kHz) Maximum RMS Voltage Swing: 72V (THD 1% , 1kHz) Power Bandwith (THD = 1% , 10 Hz - 60 kHz ref. 1kHz, half power @ 4 Ohms): Voltage Gain , ref. 1kHz: 32. 8 dB Input Sensitivity (@ rated power, +4 dBu (1. 23 Vrms) 8 Ohms, 1kHz): THD at rated output power, < 0. 05% (MBW = 80kHz, 1kHz): IMD-SMPTE (60 Hz, 7 kHz): < 0. 02% DIM 30 (3, 15 kHz, 15 kHz): < 0. 01% Maximum Input Level: +22 dBu (9. 76 Vrms) Crosstalk (ref. 1kHz, at rated < -80 dB output power): Frequency Response 15 Hz - 40 kHz (+/- 1dB , ref. 1 kHz): Input Impedance active balanced: 20 kohm Damping Factor @ 1kHz: > 300 Slew Rate: 35 V/µs Signal to Noise Ratio Amplifier, 107 dB A-Weighted, Input Sensitivity (+4dBu): Power Requirements1: 240, 230V, 120V or 100V; 50 Hz - 60 Hz Power Consumption (1/8 max. [. . . ] For customer orders, contact Customer Service at: + 1 952 884-4051 Fax: + 1 952 736-4212 For warranty repair or service information, contact the Service Repair department at: 800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO Specifications subject to change without notice. [. . . ]