User manual EBENCH MINI CAM 35 AF CAMERA SET

[. . . ] lCD displays blinking flash " " symbol indicating flash is still charging. Camera is ready for picture taking when " " symbol stops blinking and displays continuously. The automatic flash is now switched off and the flash is automatically switched in synchronously on release of the shutter and compensates for shadows, e. When the subject is in front of a very bright background (sun, light sky). [. . . ] 6) At very low light levels the Red-Eye Reduction feature may be required for pictures of people or pets. Hold the Shutter Release Button halfway down for about 1 second to automatically activate Red Eye Reduction and then depress it fully to take the picture. Make sure your subject is positioned within the flash range to ensure proper exposure. Pictures of people or pets taken at low light levels may exhibit "Red-Eye" effect. This can be reduced by having your subject look away from the camera or by turning on bright room lights. Additionally this camera is equipped with a Red-eye Reduction feature. Depressing the Shutter Release Button halfway will turn on a high power Red Eye Reduction LED (10) on the front of the camera. This will cause the subject's eye pupils to close partially, reducing the "Red-Eye" effect. 2g) will be most effective when your subject is in the center of the picture. In this mode the film is not wound on, but the camera is ready to take another photograph. For example: You wish to combine the clear outlines and details of a sunset with the lights (e. This is how you can do it: Set up your camera, ideally on a stand, sight on your subject and press the multifunction switch (1) and then select the function (ME). As soon as the town lights have been switched on, select the function OFF with the multifunction switch and make the second exposure. To do this, select the multiple exposure function (ME) again before the additional exposure. At the end of the roll of film, the motor film advance will stop automatically, and you will not be able to take more pictures. When motor sound stops, indicating rewinding is complete, check that the frame counter reads "0". If motor sound is unusually slow or laboured, batteries may need to be replaced. If you wish to wind the film back before the end of the film is reached, press the rewind button (19). [. . . ] The camera's autofocus system will focus on whatever is in the centre area of the picture. If your main subject is near the edge of the picture you can use the autofocus lock feature. 2) Depress and hold the Shutter Release Button halfway to lock the focus ON. 3) While still holding the Shutter Release Button halfway, recompose the picture as you desire it and take the picture. [. . . ]