User manual EBENCH KH 2320 DESIGNER AUDIO UNIT WITH VERTICAL CD PLAYER

[. . . ] Therefore you must never leave children unsupervised in the vicinity of electrical equipment. The heat building up inside the equipment can lead to faults or to it catching fire. Do subject this equipment to extremes of temperature: ­ Avoid direct sunlight and heaters ­ Do not cover the ventilation slots ­ Leave approx. 10 cm free around the sides The equipment is not to be used in the direct vicinity of inflammable materials (e. g. [. . . ] CD compartment @ Display # Remote control signal sensor $ Mono/stereo button (only on FM radio) % Tone selector ^ Mute switch & CD play/ pause * Device selector ( RANDOM button ) 8 Up/Forward button (*) _ Stop button (CD) / Band selector (VHF + Protective cover | Pause button (cassette only) ` Stop/ eject button (cassette only) 1 Fast forward (cassette only) 2 Rewind (cassette only) 3 Play button (cassette only) 4 Record button (cassette only) 5 Headphones connector 6 Cassette compartment 7 SNOOZE button (remote control only) 8 7 Down/Reverse button (*) 9 Functions button Aux, CD, Tuner, Tape (remote 0 INTRO button (remote control only) - SLEEP / TIMER button = M-UP/REPEAT button (*) \ MEMORY/CLK-ADJ button (*) Q Reduce volume W Increase volume E ON / OFF (standby) switch R Display / operating indicator T Mains plug Y Loudspeaker connections U Cinch connections for external devices (AUX) I Noise reduction system (cassette only) O Aerial connector P Fastening for wall mounted option control only) / MW) The operating features marked with a (*) have several different functions depending on the device selected (e. g. The operating elements | to 4 and I are exclusively for the operation of the cassette recorder. OPERATION SWITCHING ON AND OFF [ » POWER / STAND-BY « ] · · · · If the mains plug is inserted, the equipment is in Stand-by mode. For longer periods of absence pull out the plug from the mains socket. 5 DEVICE/ SOURCE SELECT [ » CD / TUNER / TAPE / AUX « ] · Press the appropriate button * to select a device or change the source: CD = CD player TUNER = radio TAPE = cassette recorder AUX = external device, e. g. record deck ADJUST VOLUME [ » VOLUME / MUTE « ] · · · To increase the volume use the button W. To mute (silence) the loudspeakers and headphones press the mute button ^. ADJUST TONE [ » CLASSIC / ROCK / POP « ] Use the tone selector button % to set the tone quality of a track to suit the type of music and increase listening pleasure. The current setting CLASSIC, ROCK or POP is shown in the display @ - (blank display = neutral tone). HEADPHONES [ » PHONES « ] 8-32 Ohm stereo headphones 5 can be connected to the headphones connector with a 3. 5 mm jack plug. As soon as the headphones are connected the loudspeakers are turned off. Please note that high levels of sound can lead to serious hearing damage. SETTING THE CLOCK 01) 02) 03) 04) 05) 06) 07) 08) Press the Display button R to change to the time operating indicator. Press the Up/Forward button ) or the Down/Reverse button 8 to set the clock in 24 hour or 12 hour display. Press the MEMORY/CLK-ADJ button \ again - the hours indicator flashes. Set the hours using the Up/Forward button ) or the Down/Reverse button 8. Press the MEMORY/CLK-ADJ button \ again - the minutes indicator flashes. Set the minutes using the Up/Forward button ) or Down/Reverse button 8. The clock is now set and starts (the colon flashes). SETTING THE SWITCH-ON TIME [ » TIMER « ] If the Switch-on time feature is enabled then your Designer Audio Unit can wake you at your chosen time. 01) Using the appropriate button * select the desired device/ source (CD, TAPE or TUNER). for TUNER (RADIO) set the desired station, for TAPE (CASSETTE RECORDER) insert the tape and wind to the correct place or insert a CD and if required program a track sequence. 06) Set the hours by pressing the Up/Forward button ) or the Down/Reverse button 8 as appropriate. 08) Set the minutes by pressing the Up/Forward button ) or the Down/Reverse button 8 as appropriate. 09) Press the MEMORY/CLK-ADJ button \ again - the Switch on time is stored. 11) Then switch off the Designer Audio Unit (ON-/OFF-button E). ACTIVATE SLEEP FUNCTION [ » SLEEP « ] · · · You can set a time of between 90 and 10 minutes, after which the device switches itself off. To activate a Switch-off time of 90 minutes, press the SLEEP button - once briefly. To set a shorter Switch-off time, keep the SLEEP button - pressed until the desired time is displayed. [. . . ] The display @ shows RANDOM. CASSETTE RECORDER INSERT CASSETTE 01) Open the protective flap + forwards. Behind it you will find the operating buttons for the cassette recorder (and the headphone connector). 05) Select the cassette recorder using the device selector TAPE button *. 8 BASIC FEATURES OF THE CASSETTE RECORDER · · · · · START PLAY: Press Button 3 to start playing. REWIND: Press button 2. RECORD CASSETTE The Designer Audio Unit KH 2310/20/30 is equipped with automatic level control. [. . . ]