User manual EBENCH KH 2247 ANALOGUE FM RADIO

[. . . ] Check that the electricity type and mains voltage matches the information given on the power adapter type plate. â· ONLY use power adapters with an output voltage of 6 V . When connecting a power adapter ensure that the polarity of the barrel connector concurs with that at the jack socket DC IN. [. . . ] On/Off switch with volume controller Frequency scale Carrying handle Selector switch AM/FM (Medium wave/Short wave) Telescopic antenna Frequency regulator DC 6 V: Input for power adapter (on the right side) Loudspeaker Battery compartment (on the bottom) Headphone connector (on the left side) Take the radio out of the packaging. Always change all batteries at the same time and always use batteries of the same type. â· Should the batteries leak, wear protective gloves and clean the battery compartment with a dry cloth. You can connect a power adapter to the radio via a 5 mm barrel connector. The secondary voltage must be 6 V and the barrel connector must be poled positive on the inside. Then insert the power adapter into a mains power socket whose voltage matches the information given on the power adapter type plate. The radio now operates with electricity from the power adapter and the supply from the batteries is switched off. Before taking the appliance into use check to ensure that all of the items listed have been supplied and that there are no visible signs of damage. You can provide the radio with power either via batteries or from a power adapter. Should a power adapter be connected, power provision from the batteries is switched off. To switch the radio on, turn the On/Off switch with volume controller q to the right, until you feel that a slight resistance has been overcome. To switch the radio off, turn the On/Off switch with volume controller q to the left, until you feel that a slight resistance has been overcome. Open the battery compartment o on the bottom of the radio in that you remove the cover in the direction of the arrow. Insert the four batteries into the battery compartment o, ensuring their positionings comply with the polarity markings given in the battery compartment o. Turn the On/Off switch with volume controller q to the right to increase the sound volume. Turn the On/Off switch with volume controller q to the left to reduce the sound volume. If you do not intend to use the appliance for an extended period, remove the batteries. Using the frequency requlator y you can adjust the radio to receive your desired radio station w. [. . . ] The appliance has been manufactured with care and meticulously examined before delivery. In the case of a warranty claim, please make contact by telephone with our service department. The warranty covers only claims for material and maufacturing defects, not for wearing parts or for damage to fragile components, e. [. . . ]