User manual EARLEX LMB230V

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual EARLEX LMB230V. We hope that this EARLEX LMB230V user guide will be useful to you.


EARLEX LMB230V : Download the complete user guide (220 Ko)

Manual abstract: user guide EARLEX LMB230V

Detailed instructions for use are in the User's Guide.

[. . . ] DO NOT USE THIS STRIPPER FOR ANY OTHER PURPOSES THAN DETAILED IN THESE INSTRUCTIONS. Under no cirumstances should you attempt to repair a unit unless qualified and authorised to do so. Maximum weight for standing on the unit is 127 kg (20 stone) and no more than 1 person at a time. G G G G G G G G G G G G G G G G G G G G G Main Features The Earlex SteamMaster® is a professional, fast-action steam wallpaper stripper. It has many added features; Each tank is individually pressure tested. [. . . ] Prior to the steam being produced a small amount of bubbling will occur at the steam plate. When the steam has been produced, lift the steam plate above the level of the tank outlet to allow condensed steam to run back down the hose and into the tank. If you are right handed hold the steam plate in your left hand and place flat against the wall where you wish to commence removing. If you are left handed you may find it easier to operate with the other hand. Move the steam plate to the section If the steam plate is fitted with a metal swivel joint, tighten hose nut to thread using two spanners. To fill the unit, remove the filler cap and fill to the maximum water level as shown on the glass panel at the end of the tank. Replace the filler cap, connect the mains 3 immediately next to where you have just been working and use a wallpaper scraper to remove the section that has just been steamed. By working in this way you should be able to remove paper continually. You may have to leave the plate against the wall for longer periods with some papers or re-steam if not completely removed. The 230V unit will operate for approximately 1 1/2 hrs and the 110V unit will operate for approximately 3 1/4 hrs before requiring refilling. The water level is shown through the glass level indicator and should not be allowed to fall below minimum. If you require further use of the steamer, ensure unit is switched off and has stopped boiling. Slowly unscrew the cap, any remaining trapped steam will be released from beneath cap. Refill to the level indicator as before and follow above instructions. If the unit is allowed to boil dry this will operate and prevent further use. Switch the unit off and allow it to cool for at least 5 minutes, refill with water and then switch on again - the thermal cut-out should automatically re-set. When you have finished using the unit allow any remaining water to cool and then empty the unit. The mains lead and hose must be fully unwound before commencing to operate the unit. To recoil the mains lead: Fit the plug into the socket on the side of the spool and then wind the mains lead onto the spool. Storage Steam Plate The handle of the steam plate is shaped to locate between the frame and the tank. Slide the plate into position with the handle against the tank and the thread towards the base. Filler Cap To fit - screw onto the filler neck hand tight. Slowly unscrew the cap, any remaining trapped steam will be released from beneath cap. Refill to the level indicator as before and follow above instructions. DANGER FROM STEAM. To recoil the hose: Place the steam plate end of the hose into the side aperture of the spool and then wind the hose onto the spool. 4 Other Uses The SteamMaster® can also be used to: Remove Artex®. [. . . ] If this mains cable becomes damaged it should be replaced with our Part No. PS0155. Extension Leads 230V If you are using an extension lead it must be rated at a minimum of 13 amps and fully unwound. Do not operate with a lead rated at less than 13 amps as this will cause premature failure of the element which is not covered by guarantee. EC Declaration of Conformity We declare that the units: LMB conform to: 73/23/EEC, BSEN60335-2-15 & 89/336/EEC, EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3. Tim Hopper -Technical Director GUARANTEE This product is guaranteed for a period of 2 years for ordinary use and 6 months for hire purposes or where the unit is lent to other users. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE EARLEX LMB230V




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual EARLEX LMB230V will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.