User manual EAGLE ULTRAMAP

[. . . ] AccuMap and TM UltraMap TM INSTALLATION AND OPERATION INSTRUCTIONS Copyright © 1998 Eagle Electronics. A CAREFUL NAVIGATOR NEVER RELIES ON ONLY ONE METHOD TO OBTAIN POSITION INFORMATION. Never use this product while operating a vehicle. CAUTION When showing navigation data to a position (waypoint), this unit will show the shortest, most direct path to the waypoint. It provides navigation data to the waypoint regardless of obstructions. [. . . ] If you mark a location with the cursor that isn't a waypoint, the unit will 44 create a waypoint and add it to the route. To add another location or waypoint to the route, move the cursor to that location and press the ENT key. The screen below right appears. The total route distance shows at the bottom of the screen. Continue selecting waypoints until all of the waypoints in the route are on the list. Press the EXIT key to erase the menus. Delete a Waypoint from the Route To remove a waypoint from a route, first select the route, then select the waypoint that you want to delete and press the right arrow key. Highlight the "Delete" label on this menu and press the right arrow key. The unit returns to the route list with the waypoint removed from the list. (Note: This doesn't delete the waypoint from the database, it simply removes it from the route. ) Waypoint Statistics By default, this unit shows the distance and bearing from each waypoint in the route to the next. It will also show estimated time en route (ETE), estimated time of arrival (ETA), or the waypoint names (NAMES). To view the different statistics, highlight the "SHOW INFO-DIS/BRG" label, then press the left or right arrow key until the desired statistic appears. Follow a Route - Direct To Method Before starting the route, you'll need to decide if you want to start at the first waypoint and travel forward to the last waypoint or start at the last waypoint in the route and travel backwards (reverse) to the first waypoint. You can also start at the closest waypoint to your position, then travel forward or reverse through the route using the "AUTO START" feature. To follow a route, first select the route number that you wish to follow by highlighting the "Route #" label, and pressing the left or right arrow keys 45 until the desired route number appears. To run the route from the last waypoint to the first, highlight the "RUN ROUTE" label and press the right arrow key to change it from forward to reverse. Now highlight the first waypoint in the route that you wish to start with and press the right arrow key. (The first waypoint in the route is used in this example. ) The screen shown above right appears. The unit returns to the last used navigation, mapping, or windows screen. A box with the "S" inside represents your location when you started the route. A dashed line extends from this waypoint to each of the other waypoints in the route. When you enter the radius set by the arrival alarm, the unit automatically switches to the next waypoint on the list, showing navigation data to that waypoint, and so on until the last waypoint on the route list has been reached. (Note: The arrival alarm does not have to be turned on. ) The unit continues to show navigation data to the last waypoint in the route until you end the navigation. (See Cancel Navigation) Following a Route - Auto Start Method You don't have to choose the starting waypoint in a route. [. . . ] Your claim must be substantiated by a dated sales receipt or sales slip. 83 Notes: 84 How to Obtain Service (Canadian Customers Only) We back your investment in quality products with quick, expert service and genuine Eagle replacement parts. If you need service or repairs, contact the Eagle Factory Customer Service Department at the toll-free number listed below. A technician may be able to solve the problem and save you the inconvenience of returning your unit. You will be asked for your unit's serial number. 800-324-1354 Canada Only. [. . . ]