User manual EAGLE SEACHARTER 502CDF IGPS ADDITIONAL INSTRUCTIONS

[. . . ] 988-0152-131 www. eaglesonar. com FishElite® 502c iGPS & SeaCharter®502cDF iGPS Fish-finding Sonars & Mapping GPS Installation and Operation Instructions Copyright © 2005 LEI-Eagle All rights reserved. No part of this manual may be copied, reproduced, republished, transmitted or distributed for any purpose, without prior written consent of Eagle Electronics. Any unauthorized commercial distribution of this manual is strictly prohibited. LakeMaster and ProMaps are trademarks or registered trademarks of Waypoint Technologies, Inc. [. . . ] NOTE: To return to the original factory setting for Auto Sensitivity, see the entry in this section on Reset Options. If sensitivity is in manual mode, the Reset Options command will switch it back to Auto. Tip: For quicker sensitivity adjustments, try leaving the Sensitivity Control Bar on the screen as the chart scrolls. You can see the changes on the screen as you press the up or down arrows. This is handy when there's a lot of clutter in the water and you are matching the sensitivity to rapidly changing water conditions. Sonar Chart Mode The default color scheme for the sonar chart is white background, but there are other variations. You can select the chart to be displayed in Grayscale, Reverse Grayscale, Blue Background, Nightview, IceView, or Bottom Color Tracking. 72 Sonar Page & Sonar Chart Display Options The Pages Menu offers three chart display options. To access them, press PAGES| to SONAR| to Option Name|EXIT. Pages Menu showing sonar chart display options. Full Sonar Chart This is the default mode used when the unit is turned on for the first time or when it's reset to the factory defaults. Depth scales on the right side of the screen aid in determining the depth of targets. The bottom depth and surface temperature (if equipped with a temperature sensor or a transducer with a temp sensor built in) show at the top left corner of the screen. This changes all echoes into short horizontal bars, replicating a flasher sonar. The zoom bar on the far right shows the area that's zoomed when the zoom is in use. (See the Zoom section for more information. ) 73 Full Sonar Chart (left). Press ZIN and the left window zooms to 4X (right). Split Zoom Sonar Chart A split chart shows the underwater world from the surface to the bottom on the right side of the screen. Digital Data This mode shows the chart on the right side of the screen. The left side has five customizable digital data boxes containing: Water Depth, Water Temperature, Water Speed, Water Distance (distance traveled requires a speed sensor) and an air temperature sensor. The Depth box also shows settings for Shallow and Deep alarms. Digital Data. Customizing the Digital Data Screen The Digital Data screen can be customized to show digital data different from the defaults first shown. 74 Sonar Page Menu with Customize highlighted (left). Water Temp, the first customizable data box, begins flashing to show it is selected (right). 1. The Water Temperature box title bar flashes, indicating the box contents can be changed. Use to select a different type of data, then press ENT|EXIT|EXIT. The list first appears with Water Temperature selected (left). Maximum Speed has been picked to replace Water Temperature (right). Tip: You can customize other digital data boxes before returning to the Sonar Page. After changing the first box by selecting the Data Type and pressing ENT|EXIT, use to select another box to change. [. . . ] If you're in the United States and you have technical, return or repair questions, please contact the Factory Customer Service Department. Before any product can be returned, you must call customer service to determine if a return is necessary. Many times, customer service can resolve your problem over the phone without sending your product to the factory. To call us, use the following toll-free number: 800-324-1356 8 a. m. [. . . ]