User manual EAGLE JOURNEY AND STATUS INSTALLATION NOTES

[. . . ] Journey and TM Status TM INSTALLATION AND OPERATION INSTRUCTIONS Copyright © 2000 Eagle Electronics. A CAREFUL NAVIGATOR NEVER RELIES ON ONLY ONE METHOD TO OBTAIN POSITION INFORMATION. Never use this product while operating a vehicle. CAUTION When showing navigation data to a position (waypoint), this unit will show the shortest, most direct path to the waypoint. It provides navigation data to the waypoint regardless of obstructions. [. . . ] The unit stops showing navigation information. ROUTES You can connect several user waypoints together to form a route. When you recall the route, the unit shows navigation information to the first waypoint in the route, then when you reach that waypoint, it switches to the next waypoint, and so on until you reach the last waypoint in the route. To create a route, first press the MENU key, highlight the "ROUTE PLANNING" label, and press the right arrow key. If you wish to create a route using a different number, simply press the left or right arrow keys until the desired route number appears. In this example, however, we'll use route number one. 43 If you wish to name the route, highlight the "EDIT ROUTE NAME" label and press the right arrow key. Use the arrow keys to name the route, (you can use up to eight characters in the name) then press the ENT key when you're finished. The gray boxes in the lower portion of the screen comprise the list of waypoints that form the route. To add waypoints to the route, highlight the first gray box and press the right arrow key. To add a waypoint to the route from the waypoint table, select the "ADD WPT" label. Add From Waypoint List This screen is virtually identical to the waypoint screen Select a waypoint either by using the waypoint number, waypoint name, or from the waypoint list. After selecting the waypoint, highlight the "ADD TO ROUTE" label and press the right arrow key. The unit returns to the route screen with the first waypoint at the top of the list. Highlight the next waypoint location beneath the first waypoint and press the right arrow key. Now repeat the previous steps to select the second waypoint for your route. After selecting the second waypoint, the unit returns to the waypoint list screen. The second waypoint shows beneath the first one, with bearing and distance from the first waypoint in the route to the second showing under the second waypoint's name. Add From Map You can add waypoints from the map, even create new ones. To do this, select "ADD FROM MAP" from the menu as shown on the previous page. Using the arrow keys, move the cursor to the desired waypoint or location. If you mark a location with the cursor that isn't a waypoint, the unit will 44 create a waypoint and add it to the route. To add another location or waypoint to the route, move the cursor to that location and press the ENT key. The screen below right appears. The total route distance shows at the bottom of the screen. Continue selecting waypoints until all of the waypoints in the route are on the list. [. . . ] Your claim must be substantiated by a dated sales receipt or sales slip. 80 4. 75MM (3/16") 4 PLACES 25MM (1") (If Necessary) GPS MODULE TEMPLATE 81 82 How to Obtain Service (Canadian Customers Only) We back your investment in quality products with quick, expert service and genuine Eagle replacement parts. If you need service or repairs, contact the Eagle Factory Customer Service Department at the toll-free number listed below. A technician may be able to solve the problem and save you the inconvenience of returning your unit. You will be asked for your unit's serial number. 800-324-1354 Canada Only. [. . . ]