User manual EAGLE INTELLIMAP 320 INSTALLATION NOTES

[. . . ] 988-0143-681 www. eaglesonar. com Mapping GPS Receiver IntelliMap 320 Installation and Operation Instructions Copyright © 2002 Eagle Electronics All rights reserved. Eagle® is a registered trademark of Eagle Electronics Marine-Tex is a trademark of Illinois Tool Works Inc. Points of Interest Data in this unit are by infoUSA, copyright 2001-2002, All Rights Reserved. infoUSA is a trademark of infoUSA, Inc. eXitSource Database, copyright 2001-2002 Zenrin Co. Ltd. Eagle Electronics may find it necessary to change or end our policies, regulations, and special offers at any time. [. . . ] On the screen, trails are represented by a solid line extending from the back of the current position arrow. The IntelliMap 320 is set at the factory to automatically create and record a trail while the unit is turned on. The IntelliMap 320 will continue recording the trail until the length reaches the maximum trail point setting (default is 2, 000, but the unit can record trails 9, 999 points long). When the point limit is reached, the IntelliMap 320 begins recording the trail over itself. By default, the trail flashes once a second, making it easier to see against the background map. With the default auto setting, this unit creates a trail by placing a dot (trail point) on the screen every time you change directions. (The methods used for creating a trail and the trail update rate can both be adjusted or even turned off. See Section for 5 for Trail Options. ) To preserve a trail from point A to point B, you must "turn off" the trail by making it inactive before heading to point C or even back to point A. When the current trail is set inactive, the IntelliMap 320 automatically creates and begins recording a new trail. 43 Visible symbol Active symbol Sequence for saving a trail and beginning a new one. The arrow to the right of Trail 14 indicates the trail is "active, " and the check to the left indicates the trail is visible on the map display. The right figure shows the Edit Trail menu, with the Active command selected. 2. As you leave the Edit Trail menu, you will notice that a new trail starts with a new sequential number. In the example figure below, the new trail is number 15, showing zero points. Note that Trail 14 is inactive, but it is still visible on the map. New trail, named "Trail 15, " is created when Trail 14 is made inactive. Any new travel will be recorded in this trail, which is active and visible. Trails do not need to be visible in order to be active. You can save and recall up to 10 different plot trails, which can also be copied to your MMC for archiving or for transfer to your MapCreate software. 44 Tip: Another quick way to stop recording one trail and begin a new one is to use the New Trail command: Press MENU|MENU| to MY TRAILS|ENT|ENT. Caution: You also have the option of completely turning off trail recording, under the trail Options command. However, if the Update Active Trail option is left turned off, it will cancel the automatic trail creation feature. Displaying a Saved Trail The active trail is automatically displayed on the map (the "Visible" option) with the factory default settings. You can selectively turn trail display off and on for any saved or active trail. In the Saved Trails List, visible trails have a check mark in front of the trail name. Press | to enter the Saved Trail list, then use or to select the desired Trail Name|ENT. Press | to enter the Saved Trail list, then use or to select the desired Trail Name|ENT. [. . . ] We reserve the right to make changes or improvements in our products from time to time without incurring the obligation to install such improvements or changes on equipment or items previously manufactured. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. REMINDER: You must retain the sales slip or sales receipt proving the date of your original purchase in case warranty service is ever required. EAGLE ELECTRONICS PO BOX 669, CATOOSA, OK 74015 (800) 324-1354 119 How to Obtain Service. . . . . . in the USA: We back your investment in quality products with quick, expert service and genuine Eagle replacement parts. If you're in the United States and you have technical, return or repair questions, please contact the Factory Customer Service Department. [. . . ]