User manual EAGLE FISHSTRIKE 1000C Operation Instruction

[. . . ] 988-0143-801 www. eaglesonar. com FishStrike ®1000C & SeaChamp ®1000 CDF Fish-finding Sonars & Mapping GPS Installation and Operation Instructions Copyright © 2005 LEI-Eagle All rights reserved. No part of this manual may be copied, reproduced, republished, transmitted or distributed for any purpose, without prior written consent of Eagle Electronics. Any unauthorized commercial distribution of this manual is strictly prohibited. Navionics is a registered trademark of Navionics, Inc. eXitSource Database, copyright 2001-2003 Zenrin Co. [. . . ] The left side has four digital boxes containing, Depth, Track, Bearing and a Temperature Graph. Digital Data/Chart Customize Page Displays Every Page display option except Full Map (on the Map Page) has customizable Digital Data boxes to provide on-screen information. The various data available from your unit are divided into categories in the Data Viewer menu. These categories include GPS Data, Navigation, Trip Calculator, Time, Sonar and Miscellaneous Data You can select 80 items from any of these categories for display in any data box. The category divisions are only there to help you sort through the information. To change information displayed in a data box: On the page with the digital data box you wish to change, press MENU| to CUSTOMIZE|ENT. Press ENT to modify the box or hit or to select another box, then press ENT. You'll see a list of categories with "+" or "­" symbols next to each category. A category with a "+" is expandable, meaning its contents are hidden. Data Viewer with the Sonar Data category expanded. Selecting the category name and pressing ENT will show the category's contents, so you can choose items within it. An expanded category (one with a "­" next to its name) can be collapsed to hide its contents. With the new option highlighted, press ENT to switch the contents of the box to a new data type, then press EXIT. When you are finished with the settings, press EXIT and the box name stops flashing. Map With Sonar Split Screen There is a page mode that splits the screen in half, with the map on the left and the sonar on the right. This screen option can be found on the Pages Menu under the Map Page category. 81 Map with Sonar split screen. When this screen is activated, you need to specify which side of the Menu, is active. The window with the blue title bar at the top of the screen is the active window. To switch back, just press PAGES|PAGES again. Sonar Simulator This unit has a built-in simulator that lets you run it as if you were on the water. When in simulator mode, you will see the chart file name in the Sonar Page title bar and a play symbol will flash on and off at the right end of the title bar. From the Sonar Page, press MENU|MENU| to SONAR SETUP|ENT| to SONAR SIMULATOR ENT|ENT. Main Menu with Sonar Setup command selected (left). Sonar Simulator menu, with simulator turned on (right). NOTE: With Simulate Position checked, the simulator will also automatically run the GPS simulator (if GPS data was recorded with the sonar log). To use the default sonar chart log stored in the unit, press ENT|EXIT. The recorded chart begins scrolling across the screen, just as if you were on the water. Turn off Sonar Simulator by pressing MENU|MENU| to SONAR SETUP|ENT| to SONAR SIMULATOR|ENT|ENT|EXIT. "Play" symbol flashing Title bar with chart file name Sonar Page, playing a recorded sonar chart in Sonar Simulator mode. Tip: The Sonar Simulator can use sonar charts recorded (logged) on a MMC card. (To see how, read the entry in this section on Log Sonar Chart Data. ) To play back a sonar chart, make sure the MMC containing the chart is installed, then: 1. [. . . ] If you're in the United States and you have technical, return or repair questions, please contact the Factory Customer Service Department. Before any product can be returned, you must call customer service to determine if a return is necessary. Many times, customer service can resolve your problem over the phone without sending your product to the factory. To call us, use the following toll-free number: 800-324-1356 8 a. m. [. . . ]