User manual EAGLE FISH ID 128 ADDITIONAL INSTRUCTIONS

[. . . ] Fish ID 128 Fish ID 128 INSTALLA ALLATION OPERATION INSTALLATION AND OPERATION INSTRUCTIONS INSTRUCTIONS ® 1 TABLE OF CONTENTS INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 PERMANENT MOUNT TRANSDUCER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Typically, this occurs when you wish to see more detail, so you need to increase the sensitivity. The procedure to adjust it is the same whether the unit is in the automatic or manual mode. To change the sensitivity level, first press a menu key until the sensitivity menu appears. If the unit is in automatic, the menu shows "AUTO SENS. " Otherwise, the menu shows "MAN SENS. " Now press the up arrow key to increase the sensitivity, the down arrow to decrease it. Echoes scrolling onto the screen will also show the effects of the sensitivity change. If you reach the maximum or minimum sensitivity level, a tone sounds alerting you to the limits. After you've adjusted the unit to the desired sensitivity level, press the PWR/CLEAR key to clear the display. If you wait a few seconds, it will automatically clear. FISH ID FEATURE The Fish ID feature identifies targets that meet certain conditions as fish. The microcomputer analyses all echoes and eliminates surface clutter, thermoclines, and other undesirable signals. The Fish ID feature displays symbols on the screen in place of the actual fish echoes. In other words, it displays a small fish symbol when it thinks a target is a small fish, a medium fish symbol on a larger target, etc. It can't distinguish between fish and other suspended objects such as turtles, submerged 17 floats, air bubbles, etc. Individual tree limbs extending outwards from a group of limbs are the hardest objects for the Fish ID feature to distinguish from fish. You may see Fish ID symbols on the screen when, in fact, there are no fish. Practice with the unit when the Fish ID feature is on and off to become more familiar with Fish ID. To turn this feature off, press a menu key until the Fish ID feature's menu appears as shown at right. To turn it on, repeat the above steps, but press the down arrow key instead. The Fish ID feature can't be used when the unit is in the manual mode. If you turn the automatic feature off, the Fish ID feature will automatically be turned off, also. FISHTRACKTM This sonar automatically displays the depth of a target when the Fish ID feature places a fish symbol on the screen as shown below left. To turn it off or on again, press a menu key repeatedly until the Fish Track menu appears as shown below. Remember, Fish ID must be on in order to use the Fish Track feature. 18 CHART SPEED The rate echoes scroll across the screen is called the chart speed. It's adjustable by pressing a menu key until the chart speed menu appears. [. . . ] If you need service or repairs, contact the Eagle Factory Customer Service Department at the toll-free number listed below. A technician may be able to solve the problem and save you the inconvenience of returning your unit. You will be asked for your unit's serial number. 800-324-1354 Canada Only. Central Time. How to Obtain Service (International Customers Only) If you need service or repairs, contact the dealer in the country you purchased your unit. [. . . ]