User manual EAGLE ACCUMAP SPORT Operation Instruction

[. . . ] AccuMap Sport INSTALLATION AND OPERATION INSTRUCTIONS TM TM 1 Copyright © 1996 Eagle Electronics, Inc. AccuMap SportTM is a trademark of Eagle Electronics EagleTM is a registered trademark of Eagle Electronics IMS SmartMapTM is a trademark of Lowrance Electronics, Inc. A CAREFUL NAVIGATOR NEVER RELIES ON ONLY ONE METHOD TO OBTAIN POSITION INFORMATION. The background map built into this unit is not intended for navigation and its accuracy has not been verified. [. . . ] To set either timer, first switch to a screen that is showing the timer that you want to use. Next, press the MENU key, then move the black box to the desired timer set menu. Using the right and left arrow keys, move the black box to the first number in the time that you want to set. (The time is in hours, minutes, and seconds) Now press the up or down arrow keys until the desired number shows. Continue until the time shown in the display is correct, then press the ENT key. To start the timer, press the MENU key, then move the black box to the "Dn Timer STOP/ GO" label. If you turn the up timer's alarm on (press the right arrow key when the black box is on the (Up ALM. . . Off/On label), it will sound a tone when it reaches the time you entered in the up timer set menu. You can reset either alarm to the time you originally set by pressing the MENU key, then moving the black box to either the "Up Timer Reset" or "DN Timer Reset" label, then press the right arrow key. 31 REPROGRAM BOXES The digital boxes on the MAP 4 and NAV 1 screens can be reprogrammed. The changes you make to the screen will remain in memory, even if all power is removed from the unit. You can, however, return the boxes to the factory settings from the "Preset Groups" item in the "System Setup" menu. To customize a screen, first switch to either MAP 4 or NAV 1, whichever you want to customize. Next, press the MENU key, then press the up or down arrow key until the "Reprogram Boxes" menu is surrounded by the black box. The screen shown as number two appears as shown at the top of the next page. The unit flashes a message on the screen, telling you it's adding the new window to the group. You can now press the right or left arrow keys to select the next box in the group. When you're filled the group with boxes, the unit will automatically save your reprogrammed group. If you're finished selecting boxes before filling the group, press the EXIT key. If you fill the group with boxes, the unit will automatically leave the menu after the last box is selected. To return the group to its factory default, see the "Preset Groups" in the "System Setup" section. 32 REPROGRAMMING A GROUP 1. 3. SELECT "REPROGRAM BOXES" FROM MAIN MENU. THE BOX SELECTION SCREEN APPEARS. PRESS THE RIGHT ARROW KEY UNTIL THE DESIRED BOX APPEARS. THIS IS THE FIRST WINDOW THAT WE WANT TO USE. PRESS THE UP ARROW KEY TO SELECT IT. 4. 5. 6. THE FIRST BOX IS PLACED AT THE TOP AFTER . [. . . ] We reserve the right to do so without notice. 69 70 How to Obtain Service (Canadian Customers Only) We back your investment in quality products with quick, expert service and genuine Eagle replacement parts. If you need service or repairs, contact the Eagle Factory Customer Service Department at the toll-free number listed below. A technician may be able to solve the problem and save you the inconvenience of returning your unit. You will be asked for your unit's serial number. 800-324-1354 Canada Only. [. . . ]