User manual DMC B-BONE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DMC B-BONE. We hope that this DMC B-BONE user guide will be useful to you.
Manual abstract: user guide DMC B-BONE
Detailed instructions for use are in the User's Guide.
[. . . ] OWNER S MANUAL
IMPORTANT NOTICE
WELCOME
Thank you for purchasing an Daelim vehicle. We hope you enjoy safe riding.
OPERATOR AND PASSENGER
This motorcycle is designed to carry the operator and one passenger.
WARNING
Attempting to change the pre-set maximum speed may cause danger and will void the Daelim warranty.
ON-ROAD USE
This motorcycle is designed to be used only on the road.
READ THIS OWNER'S MANUAL CAREFULLY
Pay special attention to statements preceded by the following words:
WARNING
Indicates a strong possibility of severe personal injury or death if instructions are not followed.
CAUTION
Indicates a possibility of personal injury or equipment damage if instructions are not followed.
NOTE
Gives helpful information. keep it with your vehicle at all times, even though your vehicle is resold.
CONTENTS
SPECIFICATION OPERATION INSTRUCTION
SAFETY PRECAUTIONS
PRIOR TO STARTING VEHICLE FOR SAFE DRIVING OPERATION CORRECT ATTIRE MODIFICATION ATTACHMENT MUFFLER 3 4 4 5 5 6 7 7 8 8 9 12 12 12 12 13 13 13 14 14 15 15
EQUIPMENT USAGE
STEERING STEM LOCK SEAT LOCK HOLE FOR A CHAINLOCK CORRECT DRIVING OPERATION STARTING THE ENGINE AFTER STARTING ENGINE PROPER DRIVING METHODS STOPPING
16 16 16 16 17 17 19 20 21 23 23 24 24 26 27 27 28 28 28
PARTS LOCATION METER READING AND USAGE
METER WARNING AND INDICATOR LAMPS MALFUNCTION INDICATOR LAMP
SELF INSPECTIONS BEFORE OPERATION
INSPECTION OF CONCENED AREA BRAKE INSPECTION TIRE INSPECTION FUEL CHECK ENGINE OIL CHECK LIGHTS AND WINKER INSPECTION BULB REPLACEMENT METHOD REAR VIEW MIRROR FUEL LEAK INSPECTION
SWITCH OPERATION
MAIN SWITCH START BUTTON HEADLIGHT PASSING SWITCH WINKER SWITCH HORN BUTTON
1
MAINTENANCE
MAINTENANCE SCHEDULE MAINTENANCE PRECAUTIONS REPLENISHING FRONT / REAR BRAKE FLUID BRAKE HOSE, PIPE LEAKAGE, DAMAGE, ASSEMBLY STATE FRONT BRAKE PAD WEAR CHANGING ENGINE OIL TRANSMISSION OIL INSPECTION TIRE PRESSURE INSPECTION BATTERY INSPECTION FUSE REPLACEMENT AIR CLEANER ELEMENT INSPECTION CABLE RUBBER PART SPARK PLUG HANDLING FOR POOR STARTING SIDE STAND INSPECTION CLEANING GENERAL CLEANING STORAGE GUIDE FRAME AND ENGINE NUMBER
29 29 31 31 32 32 33 34 35 35 36 37 38 38 39 40 40 41 41 42
DRIVING METHOD
DRIVING POSITION PRECAUTION WHEN DRIVING STARTING
43 43 44 45 46 46 46 47 48 49 50 50 50 51 51 51 52 53
TURNING METHOD
PRINCIPLE OF TURN EFFECT OF SPEED 3 POSITIONS OF TURNING TURNING METHOD PRECAUTION WHEN TURNING
BRAKING METHOD
BASIC PRINCIPLE OF BRAKE(FRICTION FORCE) RESTRAINT OF BRAKING EFFECT (INERTIA) BRAKING METHOD COMPARISION OF BRAKING DISTANCE IMPACT WHEN COLLISION
WIRING DIAGRAM (EURO2) WIRING DIAGRAM (EURO3)
2
SPECIFICATION
ITEM
LENGTH×WIDTH×HEIGHT(mm) WHEEL BASE(mm) GROUND CLEARANCE(mm) SEAT HEIGHT(mm) DRY WEIGHT(kgf) PASSENGER ENGINE TYPE PISTON DISPLACEMENT(cc) BORE AND STROKE(mm) STARTING SYSTEM TRANSMISSION TYPE
DATA
1, 910×750×1, 090 1, 360 126 755 130 2 OIL-COOLED / AIR- COOLED 4CYCLE 124. 9 56. 0×50. 7 START MOTOR CVT
ITEM
IGNITION SYSTEM BATTERY CAPACITY FUEL CAPACITY() RESERVE FUEL CAPACITY() TIRE SIZE FR. BRAKE SPARK PLUG FUSE(A) RR.
DATA
ECU (C. D. I) 12V10AH(MF TYPE) 7. 1(6. 8) 1. 2 120/70-13 130/60-13 TELESCOPIC UNIT SWING OIL DAMPER HYDRAULIC DISK HYDRAULIC DISK CR8EH-9 15/30 (15)
"(
)" MARKED CONTENSTS APPLY TO EURO 2 ONLY
3
OPERATION INSTRUCTION
This manual describes matters pertaining to correct operation, safe operation and simple maintenance of the vehicle you purchased. [. . . ] Check the lamp for proper operation (front/rear and right/left) and sound by operating the switch, and also a lens for damage or contamination.
CAUTION
CAUTION
Do not allow the engine to stay at a low level. The engine will become severely damaged if the vehicle is driven without the engine oil.
The lighting head light emits very hot heat. When replacing head light lamp, stop lame and winker lamp, use only a bulb of rated capacity. Using a lamp exceeding the rated capacity can cause over-discharge of battery and wire burning. If the head light is turned off due to aging while driving at night, it will cause an accident by obstructing driver's view. If the tail light is off while driving at night, it will cause an accident by failure of notice by the other drivers. Check the condition daily.
<INSPECTION OF STOP LAMP>
Turn a main switch "ON". Check a stop lamp for proper operation by operating the front wheel and the rear wheel brakes, and also a lens for damage or contamination.
27
BULB REPLACEMENT METHOD
Be sure to turn a main switch "OFF" prior to replacement of a bulb. After replacement with new bulb, check for proper operation.
Remove the headlight bulb. Install in the reverse order of removal.
HEADLIGHT BULB : 12V 35/35W
HEADLIGHT BULB HEADLIGHT ASSY FRONT WINKER LENS
FRONT COVER
CAUTION
Care is to be taken to avoid leaving fingerprints on a headlight bulb. Failing to observe this may cause early damage of the headlight bulb resulted from concentration of heat. If touched to it with bare hands, clean it with a cloth soaked with alcohol to prevent from early damage.
WINKER BULB
SOCKET RUBBER COVER
REAR WINKER LENS
<FRONT / REAR WINKER BULB>
Loosen two tapping screws to disassemble a lens.
REAR VIEW MIRROR
Check the objects at the back are well noticed when seating on a driver's seat, and also mirror for damage or contamination.
<HEADLIGHT BULB>
Check to see if the switch has a contact problem, before replace the bulb. Press the socket spring, turn counter clock wise.
Press a bulb with a light force and rotate it to counterclockwise to disassemble it. Install in the reverse order of removal.
FRONT / REAR WINKER BULB : 12V 10W X 2
FUEL LEAK INSPECTION
Check there is no gasoline leakage from fuel tank, hoses, carburetor, etc.
28
MAINTENANCE
MAINTENANCE SCHEDULE
Perform the Self Inspections Before Operation at each scheduled maintenance period. I : INSPECT AND, CLEAN, ADJUST, LUBRICATE OR REPLACE IF NECESSARY R: REPLACE L: LUBRICATE C: CLEAN FREQUENCY ITEM FUEL LINE THROTTLE OPERATION AIR CLEANER ELEMENT SPARK PLUG ENGINE OIL ENGINE OIL FILTER OIL FILTER SCREEN TRANSMISSION OIL BRAKE FLUID VALVE CLEARANCE (FUEL STRAINER) (CARBURATOR IDLE ROTATION) I I R R C R I I I I I I
×1, 000Km MONTH
ODOMETER READING(NOTE1)
1 1 4 6 8 12 12 18 16 24
REMARK
I I
I I R I R R C
I I R I R R C R I I I I
I I R I R R C I I I I
I I R I R R C R R I R I
Apply to EU2 ONLY Apply to EU2 ONLY
29
FREQUENCY ITEM BRAKE SHOE / PAD WEAR BRAKE SYSTEM BRAKE STOP SWITCH HEADLIGHT ADJUSTMENT CLUTCH SHOE WEAR SUSPENSION BOLTS, NUTS, FASTENERS WHEELS / TIRES STEERING HANDLE BEARING DRIVE BELT WEIGHT ROLLER SLIDE PIECE
Km MONTH
ODOMETER READING(NOTE 1)
1, 000Km 1 4, 000Km 6 8, 000Km 12, 000Km 16, 000Km 12 18 24
REMARK
I I I
I I I I I I
I I I I I I I I I I I I
I I I I I I I I I I
I I I I I I I I I I I I
I I I I I I I
If you do not have the appropriate tools or information to conduct maintenance, or if you feel you are not capable to perform maintenance on this vehicle, contact authorized dealers or repair shops for maintenance and repairs. To ensure safety, inspections and maintenance of these parts must be carried out by dealers, or repair centers. NOTES : (1) At higher odometer readings(16, 000Km), repeat at the frequency interval established here. (2) Service more frequently when riding in unusually wet or dusty areas. (3) Replace every 2 years, or at indicated odometer interval, whichever comes first. Replacement requires mechanical skill.
30
MAINTENANCE PRECAUTIONS
The following is an explanation of correct inspection methods, cleaning and parts replacing. Please always refer to this section when wanting to inspect or repair your vehicle.
REPLENISHING FRONT / REAR BRAKE FLUID
CAUTION
Always observe safety rules when performing maintenance on the vehicle. Choose a flat surface and make sure the main stand is in a secure down position. [. . . ] Hands : - Grip the handle the position away from the inside end of the handle with distance of one finger to facilitate the operation of the switch and lever. Wrist : - Keep the state to act freely without applying excessive force to the shoulder and arms. Knees / Feet : - Place the feet to face the front parallel and make the step bar be placed in the center of feet.
43
PRECAUTION WHEN DRIVING
Secure the safe distance. Do not drive excessively long distance and take enough break.
If any abnormality is found, stop driving and contact service center to inspect the vehicle. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DMC B-BONE
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DMC B-BONE will begin.