User manual DIRTDEVIL UD70065 1-10

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DIRTDEVIL UD70065. We hope that this DIRTDEVIL UD70065 user guide will be useful to you.


DIRTDEVIL UD70065 1-10: Download the complete user guide (380 Ko)

Manual abstract: user guide DIRTDEVIL UD700651-10

Detailed instructions for use are in the User's Guide.

[. . . ] Your cleaner contains a thermal protective device to shut off the motor to avoid overheating. After approximately 30 minutes the motor will have cooled and the vacuum will be ready to use. NOTE: the cleaner must remain unplugged during the 30 minute cooling period. To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). [. . . ] Attach tools: Clip the dusting brush into the holster at the side of the cleaner with bristles facing out. insert the crevice tool and extension wand into the slots on the side of the cleaner. Settings: For maximum cleaning performance, the following carpet height settings are recommended: Turn Upper Cord Release for easy cord removal. Note: If the cleaner is difficult to push, turn knob to the next higher setting. Higher settings: for very deep pile carpet, where easier pushing effort is desired, while maintaining good cleaning performance. Turn cleaner on by pressing the on/off pedal located on the lower back of unit. To release handle, push the handle release pedal located on the lower left side of the cleaner. Move the handle and adjust it to the desired position for (a) storing the upright, (b) operating the cleaner, and (c) depress the handle release pedal again to clean under furniture. NOTE: Brushbar could cause rug fringe area to become tangled within cleaner. Cleaner must be in its upright position to raise brushroll for use with tools and accessories. Press dirt container release button and remove dirt container from cleaner. Remove the lower hose from the base of the cleaner and the upper hose from the hose caddy. Simply push the attachment firmly onto the end of the extension wand. The TurboTool is most effective when using backward strokes over the area that is being cleaned. Hold dirt container inside trash bin and press bin release empty button to empty. tap the dirt container on the inside of trash bin to remove excess dust. Wipe inside of dust container and shroud with a damp cloth to remove excess dust. Any of the accessories can be directly attached to the hose end or the end of the extension wand. CARRY HANDLE Use the carry handle located on the top of the dirt container lid to move the cleaner from room to room. Tap the foam filter on the inside of a rubbish bin to remove excess dust and dirt from filter. [. . . ] Roll O-Ring back and turn Turbo Tool over Pivot lower housing and remove clog. WARNING: To reduce risk of injury from moving parts - unplug before servicing · Plug cleaner in and check to see if there is any suction at end of hose. In the event that further assistance is required, see your Yellow Pages for an authorized Royal® Dealer or visit our website at www. Costs of any transportation to and from any place of repair are to be paid by the owner. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE DIRTDEVIL UD70065




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DIRTDEVIL UD70065 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.