User manual DIRTDEVIL M501

[. . . ] Turn all controls to "OFF" before unplugging the vacuum cleaner. Do not shut any door on the cord or pull the cord around sharp edges or corners. Do not use vacuum cleaner if working improperly, dropped, damaged, left outdoors or dropped in water. Always turn off the vacuum cleaner before connecting or removing hose. [. . . ] Make sure that the appliance is connected to an outlet having the same configurations as the plug. No adapter should be used with this appliance. SAFETY PRECAUTIONS WARNING: 1. ELECTRIC SHOCK C O U L D OCCUR IF USED OUTDOORS OR ON WET SURFACES. USING IMPROPER VOLTAGE MAY RESULT IN DAMAGE TO THE MOTOR AND POSSIBLE INJURY TO THE USER. TO PREVENT FIRE, DO NOT PICK UP HOT OBJECTS SUCH AS CIGARETTE BUTTS, ETC. This vacuum cleaner will operate best when serviced with genuine parts. To be sure that you receive genuine parts and service at fair prices, have your cleaner serviced at an Authorized Royal Dealer or see your Yellow Pages for a dealer near you. Should you experience any difficulties in operating this vacuum cleaner, report it immediately to the Dealer from whom it was purchased. Costs of any transportation to and from any place of repair are to be paid by the owner. The service parts used in this unit are easily replaced and readily available from your Authorized Royal Dealer or see your Yellow Pages for a dealer near you. This minicleaner with revolving brush action has most features found only on upright cleaners. Follow the instructions enclosed and it will give you years of efficient service. NOTE: REGISTER YOUR CLEANER TO VALIDATE WARRANTY. OPERATING INSTRUCTIONS A. BELT INSTALLATION AND REMOVAL NOTE: THE UNIT MUST NOT BE PLUGGED IN WHEN INSTALLING OR REMOVING THE BELT. 1. Remove the plug on the face of the cleaner. NOTE: PLUG MUST BE ON WHEN ATTACHMENTS ARE NOT IN USE. 3. Using your right hand, dip the belt lifter in and hook the belt around the lip of the belt lifter. Slip the belt onto the motor shaft until the belt lifter base meets the shaft. 4. To insure proper belt placement, gently turn belt lifter clockwise and remove. (right side of belt should be closest to you). NOTE: THE BELT WILL COME OFF IT NOT INSTALLED PROPERLY. 6. Hook the belt on the right side of the motor shaft, turn counterclockwise and pull the belt towards you to release. BELT STYLE: 1 B. BAG REMOVAL AND INSTALLATION NOTE: UNPLUG CLEANER WHEN REMOVING AND INSTALLING BAG. 1. Twist to the left to remove. NOTE: KEEP BAG OPENINGS POINTED TOWARDS CEILING TO AVOID SPILLING DIRT. 2. To replace bag, place metal bag ring, with !'top" label facing up, against the motor housing as shown. Twist to the right for secure fit. NOTE: BE SURE METAL PIN ON MOTOR HOUSING AND EYELET ON METAL BAG RING ARE LOCKED TOGETHER. C. ATTACHMENT INSTALLATION 1. [. . . ] The strap should be tight around both the handle and the nozzle. F . TO REPLACE BELT OR TO ADJUST BRUSH FOR WEAR Your revolving brush has three settings to compensate for bristle wear. * After considerable use, when the Royal Prince stops picking up threads and lint, you should make your first brush adjustment. This unique revolving brush feature is designed to give long brush life. When the brush has become slightly worn or where heavy brushing is desired, replace brush in holders with number "2" visible on caps at end of brush (as shown). NOTE: ARROWS ON BRUSH ROLL AND METAL NOZZLE GUARD MUST BE POINTING IN THE SAME DIRECTION. [. . . ]