User manual DELONGHI PACS 1200HP
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual DELONGHI PACS 1200HP. We hope that this DELONGHI PACS 1200HP user guide will be useful to you.
You may also download the following manuals related to this product:
DELONGHI PACS 1200HP (288 ko)
DELONGHI PACS 1200HP (289 ko)
DELONGHI PACS 1200HP (477 ko)
DELONGHI PACS 1200HP (286 ko)
DELONGHI PACS 1200HP (293 ko)
DELONGHI PACS 1200HP (286 ko)
DELONGHI PACS 1200HP (279 ko)
Manual abstract: user guide DELONGHI PACS 1200HP
Detailed instructions for use are in the User's Guide.
[. . . ] · Always transport the appliance upright or resting on one side, with short movements only. Before moving the appliance, empty the condensate pan in the indoor unit and the base of the outdoor unit. You are therefore recommended to dispose of them in special differentiated waste collection containers. · The refrigerant gas R410A conforms to EC regulations on the environment. [. . . ] In particular cases, if there is excessive humidity, the condensate is drained through a hole in the base. To drain the water that forms, use the condensate drain connector 19 supplied, which must be fitted on the base of the outdoor unit (see Figure 8). This can then be connected to a rubber hose Note: If appropriate, the external unit can be protected with the protective cover 22 fixing it with the screw provided. The outdoor unit should be protected from the sun, rain, snow and drips from the roof.
POSITIONING THE OUTDOOR UNIT
The outdoor unit can be placed on a terrace or balcony (Fig. 12
The outdoor unit can also be installed on a window sill, if this faces onto a balcony (Fig. De'Longhi is not liable for any damage to people or things caused by the positioning of the unit in a manner not compliant with the basic standards of safety.
23
ENGLISH
Buttons and indicators on the indoor unit
BUTTONS AND INDICATORS ON THE INDOOR UNIT
MANUAL OPERATION BUTTON
RED LIGHT
YELLOW LIGHT
GREEN LIGHT
SIGNAL RECEIVER
INDICATOR LIGHTS
These turn on according to the function selected or indicate any operating anomalies.
FUNCTION OFF AIR-CONDITIONING DEHUMIDIFYING FAN HEATING
RED LIGHT
on on
YELLOW LIGHT
on -
GREEN LIGHT
on on -
ANOMALY ALARM
RED LIGHT
flashing
YELLOW LIGHT
flashing
GREEN LIGHT
flashing
see "troubleshooting" on page 32
MANUAL OPERATION
This operating mode is to be used only when the remote control is inoperative (broken, lost, flat batteries). Press the manual operation button until selecting the desired function (air-conditioning, dehumidifying, fan, heating, smart, off). Refer to the indicator lights and the table above to identify the mode selected. For each mode selected, the appliance will automatically choose the optimum values for maximum comfort. This appliance is fitted with a safety system that prevents the compressor from starting until at least 3 minutes have elapsed since it last went off.
24
The remote control
THE REMOTE CONTROL
Inserting the batteries · Remove the protective cover (see figure). · Insert two new batteries (not rechargeable) making sure the (+) and (-) are in the correct positions. NB: Alkaline batteries should be used (LR03).
1
2
When replacing or disposing of the remote control, the batteries must be removed and disposed of according to the legislation in force, being harmful to the environment.
If the remote control is not be used for a certain length of time, remove the batteries.
CORRECT USE
· Aim the remote control at the signal receiver on the air-conditioner (Fig. · Maximum distance: around 7 metres (without obstacles between the remote control and the receiver). · The remote control should be handled with extreme care and respect: without dropping it, without exposing it to direct sunlight or near sources of heat.
25
ENGLISH
Description of the remote control
THE REMOTE CONTROL
A. MODE button Selects the operating mode (air conditioning, dehumidifying, fan and heating). Buttons for SETTING THE ROOM TEMPERATURE Set room temperature or program the timer. FAN button Sets fan speed to automatic, high, medium or low in sequence. SMART button ( ) When this button is pressed, the appliance automatically establishes the most suitaHigh ble operating mode for maximum comfort.
Low H. SUPER button (
I H G F
SWING FAN
A B B
E
D
C
THE DISPLAY
Signal transmission Air-conditioning indicator Dehumidifying indicator Fan indicator Heating indicator SUPER indicator SMART indicator SLEEP indicator
High Automatic fan speed
Low High
) Starts or stops rapid cooling (in the rapid High cooling mode, the fan operates at high speed with the temperature automatically set to Low 18°C). NB: the settings are displayed even when the air conditioner is off.
I.
High fan speed Medium fan speed Low Low fan speed Used to set the temperature in SMART mode or the level of dehumidification.
26
Functions
AIR-CONDITIONING MODE
· Press the button to turn the appliance on. · A beep indicates that the air-conditioning unit is on and the symbol flashes on the display. · Press the MODE button a number of times until the air-conditioning symbol appears on the display. [. . . ] If they are very dirty, immerse in warm water and rinse a number of times. After washing, leave the filters to dry, then replace them.
31
ENGLISH
Troubleshooting
TROUBLESHOOTING
If something is not working, the problem may at times be simple to resolve. Carefully check these brief instructions before contact your local Authorised Service Centre.
PROBLEM
The air-conditioner doesn't work · · · · · ·
CAUSE
no electricity it is not plugged into the mains the timer is set incorrectly air filter dirty temperature set incorrectly the air intake/outlet grilles are blocked · · · · · ·
REMEDY
wait plug into the mains set the timer correctly clean the air filter set the temperature correctly clean the grilles
Insufficient cooling/heating
Particular odour in the room Water leaks from the indoor unit of the air-conditioner
·
air filter dirty
· · ·
clean the air filter See page 21 to install the appliance correctly unplug the appliance and contact the service centre
· ·
incorrect installation of the appliance pump malfunction
The remote control indicator is weak or inexistent
· ·
flat batteries batteries inserted the wrong way round
· ·
change the batteries check the polarity of the batteries (+) and (-) wait for three minutes
The air conditioning unit does · not operate for about three minutes after turning it on
the safety device has tripped
·
The compressor · switches on and off periodically ·
the air-conditioner is working in dehumidifying mode the antifreeze safety device has tripped
The three indicator · lights flash
operating anomaly
·
unplug the appliance, wait a few minutes and then turn the appliance on again. If the problem persists, contact the service centre.
SERVICE
If following these checks the malfunction remains, contact your nearest authorised service centre, specifying the model of the appliance and the type of defect. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DELONGHI PACS 1200HP
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual DELONGHI PACS 1200HP will begin.