User manual DAXTEN VOYAGER SERIAL BROCHURE

[. . . ] Voyager serial Addendum for Voyager UTP Extenders with Serial Link Option This extender contains daughter boards that allow a full-duplex serial data link to be maintained across the CAT5 interconnection cable in addition to PS/2 keyboard/mouse and SuperVGA video. [. . . ] Please see note below. Setting Up and Operation For the vast majority of typical applications the default settings (9600 Baud, No Hardware Flow Control) will suffice. Simply set-up your extender as detailed in the manual and connect the required serial peripheral. Please bear in mind that the Remote Unit's serial port is wired as DTE (i. e. To connect a serial printer (or other DTE rather than DCE device) to the Remote Unit. you will need a Null-Modem (crossover) cable between the Remote Unit and the printer. A serial Touchscreen may be plugged directly into the Remote Unit. Daxten Ltd 4 Harp Business Centre Apsley Way London NW2 7LW Tel. : +44 (0)20 8438 3800 Fax: +44 (0)20 8438 3899 info. co. uk@daxten. com www. daxten. co. uk Voyager serial Baud Rate Selection The daughterboard in the Remote unit has a jumper which is used to select between baud rates of 9600 (default) and 19200. Ensure the Rmote Unit is powered down before changing the jumper setting. Hardware Flow Control Most applications for the serial link will not require hardware flow control and therefore However, the daughterboards in both the Local and Remote Units have a series of jumpers which allow the selection of two alternative hardware flow control schemes across the CAT5 link, or local loopback of the flow control lines for those PC's and peripherals that require the presence of a handshaking control signal to enable them. Do not alter the position of any jumpers or headers on the daughterboard except for those described above and whose locations are shown below. Serial Daughter Board Use with a Serial Mouse As standard the serial link does not support a serial mouse. [. . . ] Dual Unit (Model 1035-21R) Specific Notes Please note that the remote serial link is always active even if the Local console is selected. Daxten Ltd 4 Harp Business Centre Apsley Way London NW2 7LW Tel. : +44 (0)20 8438 3800 Fax: +44 (0)20 8438 3899 info. co. uk@daxten. com www. daxten. co. uk [. . . ]