User manual DANE-ELEC SO EXTREME SUPER SPEED PORTABLE USB 3.0 QUICK START GUIDE

[. . . ] So Extreme SuperSpeed PORTABLE USB 3. 0 HARD DRIVE Quick Start Guide warranty: Warranty and customer support information available at danedigital. com. [. . . ] 120mm(L) x 77mm(W) x 19mm(H) 158. 75g | . 35lbs 3 year limited warranty *1 GB = approx. Due to formatting, accessible capacity will be slightly less. So Extreme SuperSpeed PORTABLE USB 3. 0 HARD DRIVE package contents: External Solid-State Drive USB 3. 0 Cable So Extreme SuperSpeed PORTABLE USB 3. 0 HARD DRIVE Quick Start Guide Backup Software Quick Start Guide Notice to Users: The use of the software contained on this external hard drive is subject to the license agreement displayed at the time of installation. So Extreme SuperSpeed PORTABLE USB 3. 0 HARD DRIVE USB connections: 1 Turn On Turn on your computer and wait for start-up to complete. 2 Connect · Connect the USB connector to the So Extreme SuperSpeed hard disk drive and your computer. B 3 Install Follow any on-screen instructions to complete the hardware installation of your new hard disk drive. Note: This USB 3. 0 device can be plugged into a USB 2. 0 host provided you use the USB 3. 0 Cable supplied, however, the USB 3. 0 device will only obtain USB 2. 0 speed while connected to a USB 2. 0 host. Once USB 3. 0 device is plugged back into a USB 3. 0 host your speeds will return to SuperSpeed USB ranges. (Remember performance may vary based on operating system or environment) So Extreme SuperSpeed PORTABLE USB 3. 0 HARD DRIVE how to disconnect: Disconnect your Portable HDD Windows: 1. [. . . ] When the "Safe to Remove Hardware" information appears on your desktop, your drive can be safely removed from the system. Important Do not remove the So Extreme SuperSpeed hard drive while the Status LED is Flashing or you may lose and/or corrupt your valuable data. 40 Do not drop! Operatingtemperature Keep magnets away! So Extreme SuperSpeed PORTABLE USB 3. 0 HARD DRIVE [. . . ]