User manual DANE-ELEC SO EASY HDMI

[. . . ] faQs 4 4 5 7 10 13 18 22 23 24 2 Thank you for choosing the So Easy hDmi multimedia player. for better use of this product, please carefully read this user's manual. any imitation will be considered as counterfeit, and the person responsible will have to assume the legal consequences. The So Easy hDmi complies with the security standards pertaining to low voltage electronic devices, as described in the Standard Part 15 Class B fCC american certification, and the certificate of the European Union CE Standard EN55022 Class B, EN61000-6-3, EN61000-6-1. [. . . ] - Please be aware that the unit still consumes power when in standby mode. 9 5. USiNg ThE DEviCE The default language setting on your So Easy hDmi is English. To change the language, please follow the instructions below: 1) Turn on the So Easy hDmi 2) access the main menu 3) Press the SETUP button on the remote control 4) go to "OSD language". 5) Select your language. 6) Press SETUP to finish and exit the menu. 10 5. 1 Connecting the device Connect the unit to an aC power supply using the power adaptor. When the blue led turns on, the device is ready to operate. (PC) USB 2. 0 HDMI AV / YPbPr Coaxial POWER USB-HOST 11 To use the av output mode: select av as the output mode for the television. Press the viDEO key on the So Easy hDmi remote to select av (CvBS) OUT mode. The menu will appear on the television screen. To use the YPbPr output mode: select YPbPr as the output mode for the television. Press the viDEO key on the So Easy hDmi remote to select YPbPr OUT mode. You must also connect the av cable (white and red) for sound since the YPbPr cable only transmits the image. (PC) USB 2. 0 HDMI AV / YPbPr Coaxial POWER (PC) USB 2. 0 HDMI AV / YPbPr Coaxial POWER USB-HOST av Output mode USB-HOST YPbPr OUTPUT mODE (Progressive scan video component) 12 To connect to a television and use the hDmi output: select hDmi mode, then press the viDEO key on the remote to switch to hDmi mode. You must also connect the av cable (white and red) for sound since the YPbPr cable only transmits the image. To connect to a hDmi monitor and use the hDmi output: press the viDEO key on the remote to switch to hDmi mode. iNSTrUCTiON fOr YOUr SOfTWarE SYSTEm Before beginning basic operation, please set up hDD player to your liking. The Setup menu enables you to adjust the Tv select the format, language etc. Once a setup is defined, the unit will operate with this setup as default. Unless you reset the device, this setup will operate as default even in the event of a power cut. Once he power and av cables have been connected, press the Power On/Off button. The unit will automatically begin data-reading, which is indicated by the blue led. Once reading is complete, the screen displays a menu (see picture below). Use the directional keys to select the item of your choice, then press the "Enter" button to confirm. 6. Use the directional keys (up, down, left, right) to select the item of your choice, then press the "Enter" button to confirm your highlighted selection. Press the "Exit" or "Setup" button to exit the Setup menu. (PC) USB 2. 0 HDMI AV / YPbPr Coaxial POWER USB-HOST hDmi Output mode 13 6. in the event that video images are fuzzy or skip intermittently, please change the Tv mode setup. Tv display: «4:3 P/S», «4:3 L/B» or «16:9 LargE» are available. 6. [. . . ] Please make sure nothing is covering the unit, preventing it from releasing heat normally. Q2: i have connected my device to a power supply but the indicator light remains off and the unit is not working. also check whether you have connected the unit properly to the power supply. finally, check that the power supply is switched on or is live, and that there isn't a power cut. [. . . ]