User manual DANBY SAC8404DE

[. . . ] x Please recycle or dispose of the packaging material for this product in an environmentally responsible manner. OTHERS x Never store or ship the air conditioner upside down or sideways to avoid damage to the compressor. x The appliance is not intended for use by young children or infirm persons without supervision: Young children should be supervised to ensure that they do not play with the appliance. x Max current is measured according to IEC standard for safety and current is measured according to ISO standard for energy efficiency. E-2 Contents x PREPARING YOUR AIR CONDITIONER s Safety Precautions . . 2 4 6 7 8 8 8 8 x OPERATING YOUR AIR CONDITIONER s Cooling Your Room . [. . . ] Insert the two batteries, taking care to respect the polarities : x + on the battery with + on the remote control. Close the cover by sliding it back until it clicks into place. 3 Operating Preparation Look around the indoor and outdoor unit. Confirm if any obstacles that may prevent the air flow are present near the air conditioner. IMPORTANT To operate the unit, the power switch is fitted to the wall must be set to ON. Using the Control Panel on the Indoor Unit You can operate with the indoor unit when you do not wish to or cannot operate the air conditioner with the remote control. You can : Adapt the On/Off, Temperature, Fan Speed, Energy Saving, Air Swing settings to your specific requirements. Example : Remote control is broken or lost. Using the Remote Control All air conditioner features except Lock function and Energy Saving mode can be controlled from your seat by using the remote control. You can : Note Adapt the Auto mode, Cool mode, Turbo mode and Fan Speed/Timer settings to your specific requirements. You must operate the Turbo, Long and Off Timer function with the remote control. E-8 Cooling Your Room You must select the Cool mode if you wish to adjust the : x Cooling temperature x Fan speed when cooling 1 If necessary, press the Result: (On/Off) button. x The power indicator on the control panel comes on. The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being: x Switched on x Stopped lt will start up normally after three minutes. IMPORTANT 2 If the is not displayed on the control panel, press the remote control one or more times until it appears. Result: Note x The indoor unit beeps each time you press the x The air conditioner runs in the Cool mode. You can change modes at any time. button on the button. 3 To adjust the temperature, press the buttons on the remote control or buttons on the control panel one or more times until the required temperature is displayed. Result: x Each time you press the buttons: - The temperature is adjusted by 1OC. x The air conditioner starts cooling, provided that the room temperature is higher than the selected temperature. Upwards. RECOMMENDATION 2 To stop the blade moving up and down, press the button again. Adjusting the Air Flow Direction Horizontally There are two sets of air flow blades. Just as the outer air flow blade can be adjusted vertically, the inner blade can be adjusted horizontally. 1 Press the Result: button. x The inner blade moves right and left. 2 To stop the blade moving right and left, press the button again. E-16 Setting the Off Timer The Off Timer enables you to switch off the air conditioner automatically after a given period of time. To set the operating time, press the button one or more times until the required time is displayed. Result: x After blinking of the timer indicator for 5 seconds, it will be changed to temperature setting. x The air conditioner will switch off automatically after the set time and the Off Timer indicator disappears. Note You can see or change the setting mode and/or the temperature by pressing the button or the buttons after setting the Off Timer. To Cancel the Off Timer Press the disappears. button one or more times until the Off Timer indicator E-17 Other Function You can use the Lock function on the control panel of the indoor unit. 1 Press the Result: x buttons simultaneously for 3 seconds. Note You can use the remote control even if the control panel is locked. buttons simultaneously for 2 To cancel the Lock function, press the 3 seconds once again. E-18 Operating Recommendation Here are a few recommendations that you should follow when using your air conditioner. Topic Power failure Recommendation If a power failure occurs when the air conditioner is operating, the unit is switched off. When the power returns, you must press the (On/Off) button to restart it. E-19 Temperature and Humidity Ranges The following table indicates the temperature and humidity ranges, within which the air conditioner can be used. [. . . ] If you have not used the air conditioner for a long period of time, set the fan going for three to four hours to dry the inside of the air conditioner thoroughly. 4 Note E-21 Solving Common Problems Before contacting the after-sales service, perform the following simple checks. Problem The air conditioner does not operate at all Explanation/Solution x Check that the breaker used for the air conditioner is switched on. x Check that the indoor unit is turned on; if necessary press the (On/Off) button on the remote control. x Check whether the Timer indicator on the indoor unit is switched on. [. . . ]