User manual DANBY DCF (ALL)

[. . . ] If you do need service, you can relax knowing help is only a phone call away. To reduce the risk of fire, burns, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following sections. Do not operate this appliance if it has a damaged power cord or plug, if it is not working properly, or if the appliance has been damaged or dropped. â· Do not splice the power cord that is equipped with this appliance. [. . . ] Grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded. If the outlet is a standard 2prong wall outlet, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. Therefore, this information and these specifications are subject to change without notice. Power Indicator light: Solid light signifies that Fan Speed Icons: Shows which fan speed is in Warning Indicator: Illuminates when the unit Used to adjust Humidity settings forward (5% increments). 8 h automatically powers off or on to a specified setting (see below for details). Each subsequent depression of the Timer button with increase the timer length in increments or 0. The Auto-Timer setting may be cancelled at any time by pressing the remote control Power button. While the appliance is off (Auto-On): Select the appropriate mode under which you want the unit to operate (HumidifyDehumidify or Air Purification) 4. The remote control allows you to define all operational aspects of your Danby Home Comfort Center. Each subsequent depression of the Timer button with increase the timer length in increments or 0. The AutoTimer setting may be cancelled at any time by pressing the remote control Power button. 4) Depress the `Mode' button on the control panel until the Humidifier icon is displayed in the LCD screen (Fig H). 5) Select the desired humidity level from 35% RH ~ 80% RH by depressing either the increase ( ) or decrease ( )buttons on the control panel. To select continuous as the mode of operation in lieu of defining a precise humidity level, press the increase or decrease button until see the " - - " in the set humidity display portion of the LCD, as shown in Fig. 6) Depress the power button to start the unit in Humidifier mode at your specified settings. The Air Purification mode is used to increase air quality by reducing common household odors and allergens such as pollen, pet dander and dust. Air purification can operate individually or in conjunction with either the Dehumidifying or Humidifying modes. 2) When required, you can operate the Air Purification mode simultaneously with the Dehumidifier or Humidifier by continually pressing the MODE button until the required combination of operating mode icons appear in the LCD display. for example , Air Purification/Dehumidifier (Fig K) or Air Purification/Humidifier (Fig L). 3) If you have selected the Air Purification mode to operate in conjunction with another mode, proceed to define the operating parameters for the selected operation. (Please refer to `Dehumidifier' on pg 7 or `Humidifier' on pg 8 for instructions). 4) Select the required fan speed (High/Low) by depressing the fan speed button. [. . . ] 1b) To remove the air intake filter: Simply pull the filter handle upwards and pull out the filter 2) The air intake filter can also be washed in lukewarm soapy water while rubbing it lightly with a brush. IMPORTANT: To avoid damaging the HEPA type filter, do not attempt to clean or wash the filter. WARNING - Do not attempt to clean the boiler chamber immediately after operating the unit in Humidification mode. Open the top cover of the unit, and remove the internal tank with care. [. . . ]