User manual DAIKIN ALTHERMA NET3

[. . . ] S LEEP FAN MODE S ET TEMP UP S ET TEMP DOW N S W ING ON TIMER OFF TIMER TIMER ACTIV E CLOCK DAY H OUR MINUTE KEY ON/OFF FUNCTION On/Off the unit with overriding all the timer settings Activate/deactivate S leep function S elect Fan speeds control (Auto/High/Med/L ow) S elect operating Modes control (Cool/Heat/Auto/Dry /Fan) Increase set temperature in ° C or ° F Decrease set temperature in ° C or ° F Activate/deactivate S wing control E nable/disable the E vent 1, 2 and 3 ON T IME R setting mode E nable/disable the E vent 1, 2 and 3 OFF T IME R setting mode Activate/deactivate all set timers E nable/disable the Real T ime Clock (RT C) setting mode a) S elect the day for RT C or timer setting b) E nable/disable FAN K ey lock a) S elect the hour for RT C or timer settings b) S et Override function for 1, 2 or 4 hours a) S elect the minute for RT C or timer settings b) E nable/disable k ey lock N ote : Override Function P ress the HOU R k ey once will activate the override function for 1 hour. An indicator "H1" will show on the top left corner of the L CD. When the Override function is activated, all the timers will by passed and turn ON the unit for a fix periods of 1 hour, 2 hours or 4 hours depends on the selection, after which it will turned off. 1 OM-NET3-0906-Daikin_EN 1 3/5/07, 9:58 AM · · Starting Operation: When the unit is turned off, press the ON/OFF button. [. . . ] 7 -Day Programmable Timers The unit has 3 event functions, each event has an ON TIMER and an OFF TIMER. Press the timer key (ON TIMER or OFF TIMER) will enable Event 1 timer setting mode. Press the 3rd times will enable the Event 3 (Event handset) timer- setting mode. All timers are event triggered timers and can be overridden by the ON/OFF button and Override function. ii) iii) Set Event 1 and Event 2 Timers Under timer setting mode, "SET TIMER" will be shown on LCD and blink at 0. 5 sec interval. For Event 1 Timer setting, ` ON' or ` OFF' indication will appear and digit "1" will be displayed on the top left corner of the LCD. ` ON' or ` OFF' indication and digit "2" will be displayed during Event 2 timer setting. The timer setting can be changed through pressing the DAY key, HOUR key or MINUTE key. If there is no further time related (DAY , HOUR and MINUTE) key is pressed, the unit will quit from the timer setting mode. 2 OM-NET3-0906-Daikin_EN 2 3/5/07, 9:58 AM ENGLISH ENGLISH 1. 1 ON/OFF Button iv) Set Event 3 Timer via remote control (Optional) This timer can be controlled separately through remote control as well as ON TIMER or OFF TIMER keys. Timer 3 can be set like timers 1 and 2 like above except the DAY setting is not provided as this timer setting is valid everyday. An indicator `3' will display during the Event 3 timer setting mode. ` ON' or ` OFF' will blink at 0. 5 sec interval during the timer setting. If there is no futher time related (DAY, HOUR and MINUTE) key is pressed, the unit will quit from the timer setting mode. The ON/OFF timer setting received from remote control will override the Event 3 timer setting from the unit. 1. 8 Activating and canceling timers These timers will not triggered if the timer is not active. To activate the timers, press the TIMER ACTIVE key unit "TIMER ACTIVE" appears on LCD. This symbol is to indicate Event 1, Event 2 and/or Event 3 timers are active. Pressing the same steps will deactivate the timers and "TIMER ACTIVE" symbol will disappear. Another method to cancel the timers setting is changed all the hour setting of the timers to null one by one. When the setting is null, the LCD display --:--, then this respective timer will be disable. 1. 9 Key Lock These key lock function to inhibit any setting change. [. . . ] ii) Fix the bottom case onto the wall with the 2 wooden screws provided. Then, insert the 4-pin connection wires (from main board) through the slot on the upper center of the case as shown below. iii) To select cooling only model or heatpump model, some adjustment required in the shunt jumper setting. [. . . ]