User manual CYBEX INTERNATIONAL 770T-CT TREADMILL

[. . . ] Cybex Treadmill Product Number 770T-CT Owner's Manual Cardiovascular Systems Part Number LT-22983-4 D www. cybexintl. com Cybex Treadmill Product Number 770T-CT Owner's Manual Cardiovascular Systems Part Number LT-22983-4 D Cybex® and the Cybex logo are registered trademarks of Cybex International, Inc. Safety SentryTM is a registered trademark of Cybex International, Inc. makes no representations or warranties regarding the contents of this manual. We reserve the right to revise this document at any time or to make changes to the product described within it without notice or obligation to notify any person of such revisions or changes. [. . . ] Clip the e-stop clip onto your clothing and test it as described under Emergency Stop in the Safety chapter. The treadmill begins a countdown, "3. . . 2. . . 1, " after which it accelerates the belt to 0. 5 mph (0. 8 kph) and enters Active Mode. 5. Hold the handrails while you step onto the running belt and begin walking. "Workout Review" is displayed and the incline returns to 0%. 43 Cybex 770T-CT Treadmill Owner's Manual Detailed Operation Guide Maximum user weight is 400 lbs. Plug the treadmill power cord into a power outlet from a grounded, single phase, dedicated circuit, rated for one of the following: · · · · · · 100 VAC, 50/60 Hz, 20A 115 VAC, 60 Hz, 20A 208 VAC, 60 Hz, 15A 220 VAC, 60 Hz, 15A 230 VAC, 50 Hz, 13A, UK 240 VAC, 50 Hz, 15A 2. WARNING: Do not stand on the running belt when starting the treadmill. Place your feet on the two top steps located on each side of the running belt. Clip the e-stop clip onto your clothing and carefully test the e-stop key to ensure it will activate in case of an emergency. See Emergency Stop Key (e-stop) in Chapter 1 for properly testing the e-stop key. Also, see Stopping the Treadmill in this chapter for further information about the e-stop key. Be sure the string is free of knots and has enough slack for you to run comfortably with the e-stop key in place. At the opening screen select Manual, Quick Start or Programs. If Manual Mode is selected, choose a Time, Distance or Calorie Goal. The range of values are displayed on the Scale. To select a program category, tap one of the program category icons from the program options screen. 44 Cybex 770T-CT Treadmill Owner's Manual To select a program, tap one of the program icons from the programs screen. Upon entering a program the display will guide you through the appropriate settings. If the Start key is pressed now, all defaults for that program will be accepted. After 10 seconds, if no key has been pressed, the first default will be accepted. After another 10 seconds the second default will be accepted and so on until the last default. If no key has been pressed for 60 seconds after displaying the last default, then the treadmill will return to the Dormant Mode. For the most accurate calorie count, you must set your correct weight before beginning your workout (including clothing). When selecting a program you must tap the Enter icon after each adjustment of Time, Level or Weight. The treadmill begins a countdown, "3. . . 2. . . 1" and sounds a tone for each count. When it reaches one (1) the treadmill gives a longer tone and then starts accelerating the belt. In Manual Mode the belt will begin accelerating to 0. 5 mph (0. 8 kph) and the incline will remain at zero percent. In a program the belt will begin accelerating and the incline will change to the corresponding speed and incline of the program and level you selected. 8. [. . . ] At Cybex's discretion, the technician may request that you return the problem part(s) to Cybex for evaluation and repair or replacement. The technician will assign you an RMA number and will send you an ARS label. The ARS label and RMA number must be clearly displayed on the outside of the package that contains the item(s) to be returned. Include a description of the problem, the serial number of the treadmill and the name and address of the owner in the package along with the part(s). [. . . ]