User manual CREATIVE HEADSET HS-1200

[. . . ] All cables used to connect this device must be shielded, grounded and no longer than 3m in length. Operation with non-certified computers or incorrect cables may result in interference to other devices or undesired effects to the product. MODIFICATION: Any changes or modifications not expressly approved by Creative Technology Limited or one of its affiliated companies could void the users warranty and guarantee rights. [. . . ] Power On / Off To turn your headset on or off headset, press and hold for 1-3 seconds. Simultaneously press and hold the power-on button for more than 5 seconds on your headset and USB Transceiver. When LED shows steady blue, your headset is now paired with the USB Transceiver. DC-IN Port To charge your headset, connect the DC charging pin to your headset. Please charge your headset for minimum 6 hours if using it for the first time. USB Connector Connect the USB Connector to any available USB Ports on your PC. Note: Not all other VoIP applications support Hotkeys configuration and settings can vary. If you suspect your Creative HS-1200 Digital Wireless Gaming Headset is not working as expected, perform the following trouble-shooting steps before having your headset serviced. If this is the first time you are using this headset, please charge for 2. Please charge your headset for minimum 6 hours if using it for the first time. Press the power up/down button on the earcup control to activate your headset. If the indicator is blinking, it means this headset needs to be paired with the USB Transceiver. Some BUSPowered USB Hubs may not have enough power to support this device. Disconnect your USB Hub and plug the USB transceiver directly into the PC. Verify that your Volume and Playback settings are not muted, and that the volume for these devices are at least halfway up. Try unplugging and re-plugging the USB transceiver to the PC* and restart your application. On a computer system that does not follow proper USB convention, there is a chance that the system may lock up when you plug in the device. Make sure the headset is charged and powered off when you try to pair. [. . . ] Contact Creative Customer Support should you need a replacement power adaptor. Do not attempt to service any part of the digital wireless headset / USB transceiver yourself as opening or removing covers may exposed you to dangerous voltage or other hazards. When you plug in the USB transceiver, the LED indicator will light up. [. . . ]