User manual COBY TF-TV251

[. . . ] CARE SHOULD BE TAKEN WHEN REMOVING BACK CABINET FOR SERVICING; SUB CHASSIS MAY BE DAMAGED IF ALLOWED TO BECOME UNSUPPORTED. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING - To reduce the risk of fire or shock hazard, do not expose the TV to rain or moisture. NOTICE If the same pattern is continuously displayed on the Monitor / TV for a long period of time, a residual image may be "burned in" to the screen. [. . . ] You will be able to watch with a more realistic movie screen. 1 Press [MENU]. -The <Picture> Menu will appear. 2 Press [ 3 Press [ 4 Press [ ] to move to <Film Mode>, then press [OK]. ] to toggle <Film Mode> between <Off> and <On>. 5 Press [EXIT] to exit the menu. Useful Tips Even if film mode is activated, the signal status may take precedence. Adjusting the Screen Size You can select the size of the screen depending on the type of program. 1 Press [MENU]. -The screen size will be selected. 2 Press [ 3 Press [ 4 Press [ 5 Press [EXIT] to exit the menu. Useful Tips Depending on the input signal, some screen sizes may not be selectable. The screen size may be saved individually according to the input signal (digital TV, analog TV, External Input 1 and 2 , S-Video, etc. ) Press [ASPECT] Each press switches between <16: 9>, <Panorma>, <Zoom1>, <Zoom2> and <4: 3>. Useful Tips Some screen modes may not be selectable depending on the input signal. When watching digital broadcasts or when the input mode is HDMI or PC, only the 4:3 and 16:9 screens can be selected. For HDMI input, the screen size selection can be either PC or TV mode. They differ by the ratio of the amount cut on the left, right, top, and bottom of the screen. Screen Size Menu : The screen size for widescreen DVDs or broadcast programs. Expansion : Expands a 4:3 screen sideways and shows only the center area. 4: 3 : The screen size for video and current broadcast programs. 16 : 9 If you force a still picture or use the basic (4:3) screen over a long period of time, the LCD TV may show some residual images. Use the native widescreen (16:9) mode whenever possible. 24 Capturing a Still screen ENGLISH You can pause a scene on the screen. -The <Multi-Track> Menu will appear. 1 2 Press [ 3 Press [ 4 Press [ ] to move to <Mono>, <Stereo> or <SAP>, then press [OK]. -The selected sound will be set. While Mono is on air 5 Press [EXIT] to exit the menu. All modes will have mono sound. While Stereo is on air Mono : Mono sound is selected. SAP : Mono sound is selected. While SAP is on air Mono : Mono sound is selected. SAP : SAP sound is selected. Useful Tips The sound settings are only supported in TV (analog broadcast) mode. <Stereo>, <SAP> will only operate when a network signal is available. 28 Automatic Time Settings 1 Press [MENU]. -The <Setup> Menu will appear. ENGLISH The auto time setting will receive time information from the digital broadcast station. 2 Press [ 3 Press [ 4 Press [ 5 Press [ ] to move to <Time>, then press [OK]. -The <Time> Menu will appear. ] to move to <Clock>, then press [OK]. ] to select <Auto>. 6 Press [EXIT] to exit the menu. Useful Tips The time w ill be set automatically by the d igital broad casting inf ormation. Th ere m ay be a sli gh t error i n t h e t i m e d epen d i n g on t h e broad c ast st at i on . Pressing [ INFO] w ill show the current time. Manual Time Settings Setting the year, month, day, hours and minutes can be done by pressing the numeric buttons. 1 Press [MENU]. -The <Setup> Menu will appear. 2 Press [ 3 Press [ 4 Press [ 5 Press [ 6 Press [ 7 ] to move to <Time>, then press [OK]. [. . . ] Check if the digital channel selection is correctly connected to your antenna cable. Menu and Remote Control Problems Solve Press [input selection] to select the device to play. Check the angle of the remote control from the product or if there are any obstacles between the remote control and the product. Avoid positioning bright lights near the TV that shine a strong light on the TV remote sensor. The Remote Control isn't functioning well. I cannot change channels with the remote control. A Menu cannot be selected. Press [input selection] and select <TV>. [. . . ]