User manual COBY DVD-R1000 RELEASE NOTE

[. . . ] COBY DVDR-1000 IMPORTANT PLEASE READ! COMMON TROUBLESHOOTING ISSUES ISSUE #1 NO PICTURE Make sure your TV is turned to the correct Video line (AV Input/Video Input 1, 2, 3. etc). [. . . ] The Yellow, Red and White cable will connect into the DVD Recorder Audio and Video INPUT. STEP3- Set the DVD Recorder to appropriate Audio and Video INPUT line. Pressing the AV button on your DVD Recorder remote control does this function. By pressing the AV button on the DVD Recorder remote control you will see the image from the VCR of the Receiver Box on your TV screen. Once the image appears on your TV screen, insert your DVD+R or DVD+RW disk and press the record button on the DVD Recorder remote control. ********* WHEN USING A RECEIVER BOX, YOU CANNOT SET THE DVD RECORDER TO RECORD FROM A SPECIFIC CHANNEL. THE ONLY WAY TO ACCOMPLISH THIS IS TO LEAVE THE RECEIVER BOX TURNED ON AND SET IT TO THAT SPECIFIC CHANNEL. ISSUE #6 PICTURE FADES DARK TO LIGHT You cannot connect the DVD Recorder through your VCR or TV/VCR combo. If you cannot connect directly to the TV via a Yellow Video input, then you will need to purchase an RF Modulator and a four-foot Coaxial wire at your local electronics store. ISSUE #7 HAD PICTURE, NOW RECEIVING A BLACK OR BLUE SCREEN The DVD player may be set to Progressive Scan Mode. [. . . ] You can also reach us online at customerservice@cobyusa. com or techsupport@cobyusa. com 1-800-681-2629 OR 718-416-3197 [. . . ]