User manual COBY CT-P840

[. . . ] (If you are in the "AV" mode, press the TV/AV button to switch into the "TV" mode. Once you have the TV--MENU setup screen, the "1-Antenna " should be highlighted. [. . . ] Once you have selected AIR as your signal, you will need to do a channel scan. Press the "CHANNEL- DOWN" button to enter the "2-AUTO" menu. Once you are in the AUTO menu, Press the "VOL- UP or VOL- DOWN" button to start the channel scan. 5) 6) 7) 8) Once the channel search has been completed, simply change the channels by "ChannelUP or Channel- Down" button on the remote control. ISSUE #2 CONNECTION USING THE COAXIAL CABLE "WITHOUT" A CABLE RECEIVER BOX 1) 2) 3) 4) 5) Connect the "Antenna Jack " adaptor into the "RF IN" line located on the right hand side of the unit. Connect your ANTENNA COAXIAL cable into the "Antenna Jack" adaptor. Power the unit on (Power Switch is located on the Left Hand side of the unit). The image should appear on the screen, change the channels using your receiver box remote control. ISSUE #4 CONNECTION USING THE "RCA" CABLE (YELLOW, RED AND WHITE PRONG) 1) 2) Connect the Yellow prong into your DVD, VCR, or Game console "VIDEO out". Connect the Red and White prong into your DVD, VCR, or Game console "AUDIO" out. Connect the other end of the AV cable, (Yellow and black prong) into the "Video IN and Audio IN" located on the right hand side of the unit. Yellow prong connects into the Video in (Orange connection), Black prong connected into the Audio in (Green Connection). Press the AV/TV button on the TFTV505 remote control to switch into in the "AV" mode. The image from your DVD, VCR, or Game console should appear on the TV screen. 3) 4) 5) ISSUE #5 HOW DO I CHANGE THE CHANNELS MANUALLY If you're antenna source is "AIR", then you will need to enter a two-digit number. [. . . ] For example, If you need to change the channel to channel "5", enter 0, 5. If you're antenna source is "CAB", then you will need to enter a three-digit number. [. . . ]