User manual COBRA XR1010
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual COBRA XR1010. We hope that this COBRA XR1010 user guide will be useful to you.
Manual abstract: user guide COBRA XR1010
Detailed instructions for use are in the User's Guide.
[. . . ] WARNING: Before leaving your car, make sure that you conceal your radar detector. This will reduce the possibility of break-in and theft of your unit.
1. Audio Jack
Introduction
Facts About the Safety Alert® Traffic Warning System
11
BAND
10
8 2 5
1
3
4
6
FCC-approved Safety Alert® Transmitters emit microwave radar signals to indicate the presence of a safety-related concern. Depending on the frequency of these signals, as set on the transmitter, the outgoing signal can indicate whether the transmitter is on a speeding emergency vehicle or train, or at a stationary road hazard location. [. . . ] Press and release Dim button again to select Bright setting.
LAZE LAZE REY REYE
4
BAND
E
5
Quick Start
Set Highway/ City Mode
Set Highway/City Mode City Mode
For urban drivingreduces the number of false radar alerts.
PRESS & RELEASE
Quick Start
Set Muting Mode
PRESS & RELEASE
Set Muting Mode
Cty
Note The XR-1010 will retain the chosen mode while OFF. For more detailed operation instructions on set highway/city mode, see page 11.
Manual Muting
Cty
Press and release Mute button to turn off volume while signal is in progress.
Note The factory default mode is Auto Muting. For more detailed operation instructions on setting muting mode, see page 13.
Press and release City button. Cty will display while in City mode.
To Switch Between Modes
Press and release Mute Button when no signal is being received to switch from Manual to Auto Mute.
Highway Mode
Press and release City button again. Note The unit will announce "Highway" or"City" in Voice Mode. Note City ="Beep" Highway ="Beep-Beep"
10
11
Operation
Muting
Audio Muting
The Mute button is used to temporarily turn off the alarm and control Auto Mute mode.
Operation
Selecting Auto Muting Mode (from Manual mode)
In Auto Mute mode the alerts will be heard at the set volume for 3 seconds, then automatically be reduced to a lower level.
PRESS & RELEASE PRESS & RELEASE
Muting
Manual Muting
Press this button to turn off the audio alarm.
Note To completely turn off incoming alerts while in auto mode, press and release mute button. Note Mute="Beep" OR Auto Mute="Beep-Beep"
Press and release Mute button to turn off the audio during an alert. The alarm will be turned off until the incoming audio signal is over and will reset at previous volume level for next alert. Pressing Mute button again will turn alarm back on.
Press and release Mute button for less than two seconds when no signal is being received. In Voice + Tone Mode the message "Mute" or "Auto Mute" will be heard.
Note The factory default mode setting is Auto Muting.
Selecting Manual Muting Mode (from Auto mode)
In Manual Mute mode the alerts will always be heard at the set volume level. Press and release Mute Button when no signal is being received.
12
13
Operation
Voice AlertTM Mode
Note Voice AlertTM is the factory default setting.
Detection
Voice AlertTM Mode
Press and hold MUTE button for more than two seconds to switch between Voice and Tone Mode and Tone Only Mode. When Voice AlertTM is selected "Voice AlertTM" will be heard. A "beep" will be heard when Tone Mode is selected.
Band Detection
This detector is designed to detect X, K, Superwide Ka Band Radar, Laser (including LTI 20-20*, Ultra Lyte*, ProLaser* and ProLaser III* technologies), VG-2, Safety Alert® and Strobe AlertTM* signals.
*360° Detection
Band Detection
Audible Alarm Speaker
Memory Set
Your Cobra® XR-1010 features an automatic internal electronic memory system. It will automatically "remember" your settings when the unit is turned "OFF" or removed from power source.
Memory Set
Automatically remembers settings of Dim, Muting and City/Highway modes.
In Tone Mode a different alert tone will sound for X, K, Ka, Laser (a distinctly different tone for each of the four laser signals: LTI 20-20*, Ultra Lyte*, ProLaser* and ProLaser lll*, VG-2, and Safety and Strobe AlertTM signals.
Audible Alarm Speaker and Voice AlertTM
Auxiliary Audio Jack
Auxiliary Audio Jack
Use to connect an external speaker to your Cobra® XR-1010 in environments with high ambient noise levels. The internal speaker will be disconnected.
PRESS & RELEASE
Instant-On Detection
The Cobra® XR-1010 is also designed to detect Instant-on speed monitoring signals. Immediate action is required when warning is given.
14
15
Detection
X, K, Ka Alert
X, K and Ka Bands
The display will show illumination of the band received (X, K or Ka). The signal strength will be indicated by signal strength LED's which increase in size as you approach the radar gun. To turn the VG-2 Audio Alert "on" press and hold the Dim Button for 2 seconds. The Radar Detector will beep twice indicating the VG-2 Audio Alert has been activated.
Detection
VG-2 Alert®
Safety Alert® Traffic Warning System and Strobe AlertTM
Safety Alert® Traffic Warning System and Strobe AlertTM will alert you with the following warnings: Emergency Vehicle, Road Hazard and Train.
X K Ka
Cty
VG-2 Alert®
Note The display does not indicate signal strength. In Voice AlertTM, the message "Be careful--VG2 alert" will be announced according to the band given, followed by tones until the alert is over.
VG-2 Undetectable
The Cobra® XR-1010 is undetectable by police VG-2 detection devices. During this time, the unit is still on full alert and able to detect other signals.
Strobe AlertTM W
Cty
Safety Alert® Traffic Warning System and 360º Strobe AlertTM
V
Cty
Strobe AlertTM will be indicated by a blinking W and Emergency Vehicle tone.
Safety Alert® W
Cty
V on the front of the unit will be displayed.
VG-2 Audio Alert
To turn VG-2 Audio Alert "off" press and hold the Dim , Button for 2 seconds. The Radar Detector will beep once indicating the VG-2 Audio Alert has been disabled.
PRESS & HOLD
Safety Alert® will detect Road Hazards, Trains and Emergency Vehicles. Display will show an illuminated W with separate distinct tones for Emergency Vehicle, Road Hazard and Train.
16
17
Detection
Laser
Note The display does not indicate signal strength. Note In Voice AlertTM, the message "Be careful--Laser alert" will be announced, followed by the UltraLyte, ProLaser, or 20/20 tone.
Laser & LaserEye® 360° Detection
The XR-1010 can separately identify four laser signals. ProLaser, ProLaser 3, LTI 20/20, and Ultra Lyte Laser Guns.
Radar Frequencies
There are three frequencies that have been approved by the FCC (Federal Communications Commission) for use in speed monitoring equipment. They are: X Band (10. 525 GHz), K Band (24. 150 GHz) Ka Band (33. 400-36. 000 GHz) Your Cobra® XR-1010 can detect signals in all radar bands including photo radar and STALKER radar which use the Ka band, and Cobra®'s Safety Alert® signals on the K band.
Radar Frequencies
L
Cty
The display will illuminate the L followed by a distinct beep tone identifying radar being used.
Radar/VG-2/Laser Alerts
Type of Audible Signal
Your COBRA® XR-1010 starts to signal slowly, then increases in rate very rapidly. [. . . ] This will ensure the fastest turn-around time on your repair. " You may be asked to send your unit to the Cobra® factory. It will be necessary to furnish the following in order to have the product serviced and returned. For Warranty Repair include some form of proof-of-purchase, such as a mechanical reproduction or carbon or a sales receipt. Include a typed or clearly print name and address of where the unit is to be returned. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE COBRA XR1010
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual COBRA XR1010 will begin.