User manual COBRA MR HH475 QUICK START GUIDE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual COBRA MR HH475. We hope that this COBRA MR HH475 user guide will be useful to you.
You may also download the following manuals related to this product:
COBRA MR HH475 QUICK START GUIDE (5165 ko)
Manual abstract: user guide COBRA MR HH475QUICK START GUIDE
Detailed instructions for use are in the User's Guide.
[. . . ] Introduction
Our Thanks to You and Customer Assistance
·
Introduction
Radio Controls and Indicators
Belt Clip Engagement Speaker/ Microphone External Cover
Our Thanks to You
Owner's Manual
Thank you for purchasing a CobraMarine® VHF radio. Properly used, this Cobra® product will give you many years of reliable service. How Your CobraMarine VHF Radio Works
This radio is a battery-powered portable transceiver for use afloat. It gives you two-way vessel-to-vessel and vessel-to-shore station communications, primarily for safety and secondarily for navigation and operational purposes. [. . . ] Use the Channel Up/Down button to advance to the memory location (00-99) you want to program. The memory channel number will stop flashing and the channel number will start flashing. Use the Channel Up/Down button to change to the channel you want to store into the selected memory location. Repeat steps 2 through 5 to program as many additional memories as you want. Press and release the MEM/ESC button again to return to Marine Standby mode.
Operating Your Radio VHF Marine Radio Protocols
Advanced Operation
To Recall a Stored Memory Location: 1. If a memory location has been programmed, its associated channel will display on the LCD. Your radio is now in Marine Standby mode on the selected memory location. To Exit Memory Location Mode: Press the MEM/ESC button to return the radio to Marine Standby mode. The last channel used in Marine Standby mode will now be displayed on the LCD and the MEM icon will disappear. The memory location number will start flashing and the MEM icon will be turned On. Use the Channel Up/Down button to advance to the memory location you want to erase. The memory channel number will stop flashing and the channel number will start flashing. Use the Channel Up/Down button to change to the channel to read "00" at the selected memory location. Repeat steps 2 through 5 to erase as many additional memories as you want. Press and release the MEM/ESC button again to return to Marine Standby mode.
MEM/ESC Button
MEM Icon
Memory Location Number
Channel Up/Down Buttons
Channel Number
34 English
Nothing Comes Close to a Cobra®
35
Operating Your Radio VHF Marine Radio Protocols
Advanced Operation
Channel Scan Mode
During Channel Scan mode, the radio will rapidly switch from channel to channel through all the channels. See page 20 for Squelch procedure.
Operating Your Radio VHF Marine Radio Protocols
Advanced Operation
Memory Location Scan Mode
During Memory Location Scan mode, the radio will rapidly scan through all pre-assigned memory channels.
Scanning
Memory Location Scan
A
A
NOTE The radio must be squelched for Memory Location Scan mode to function. NOTE If there are fewer than two (2) memory locations programmed in the radio, the Memory Location Scan option will not be available. To program at least two (2) memory locations, see page 34.
SCAN Button
SCAN Icon
To Enter Channel Scan: 1. The radio will immediately begin to scan the entire channel map selected in the active channel map. A signal on any channel will stop the scan for 10 seconds to allow you to listen to the traffic on that location. Press the Channel Up/Down button to resume scanning the Channel Scan channels or to change the scan direction. The SCAN icon will disappear from the LCD and the radio will return to Marine Standby mode.
MEM/ESC Button
SCAN Button Channel Up/Down Buttons
To Enter Memory Location Scan: 1. [. . . ] (Port Operations); Canada (Commercial Fishing Only); International (Intership, Port Operations, Ship Movement) U. S. (Port Operations); Canada (Commercial Fishing Only); International (Intership, Port Operations, Ship Movement) 1 watt Only Int. y Canadá Port Operations (Intership Only) Port Operations (Intership Only) Port Operations (Intership only). Restricted to communications with pilots for movement and docking of ships.
156. 575
156. 575
156. 625 156. 675
156. 625 156. 675
74 75 76 77
·
·
·
156. 725
156. 725
·
·
156. 775 156. 825
156. 775 156. 825
·
·
·
156. 875
156. 875
70 English
Nothing Comes Close to a Cobra®/Nada se compara a Cobra®
Appendix
VHF Marine Channel Assignments
Channel Map
Mapa de canales
Appendix
VHF Marine Channel Assignments
Channel Number
Número de canal
Frequency
Frecuencia
Power Limits
Límites de potencia
USA
EE. UU.
Int'l
nternac
Canada Transmit
Canadá Transm.
Receive
Recepción
Channel Use (English) Public Correspondence (Marine Operator) Non-Commercial (Recreational) Port Operations, Ship Movement Commercial (Also Non-Comercial only in Great Lakes) Port Operations, Ship Movement Commercial (Also Non-Commercial only in Great Lakes) Port Operations, Ship Movement U. S. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE COBRA MR HH475
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual COBRA MR HH475 will begin.