User manual CITIZEN WATCH E86

[. . . ] 24 18 12 TME CH -2 . 0 6 . 8 . 6 . 4 . 2 R L T ME A -2 A L-1 7 AL R H A L-1 C English CONTENTS 1. Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Before Using . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Names of Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Turn the crown to align the mode hand at the time/calendar [TME] mode. · When the crown is pulled out to Position 2, the second hand rapidly advances to the 0 seconds position and stops. Notes: · When the second hand does not stop at the 0 seconds position, reset the 0position (base position) in the "0-Position Correction Mode". · If the crown is pulled out to Position 2 when the date is changing, the date stops changing at that time, and after the second hand rapidly advances to the 0 seconds position, resumes changing until the date has finished changing. (1) Turning the crown by one revolution to the right causes the 24 hour hand, hour hand and minute hand to move forward (clockwise). (2) Turning the crown by one revolution to the left causes the 24 hour hand, hour hand and minute hand to move backward (counter-clockwise). · Turning the crown continuously by two or more revolutions causes each hand to advance continuously. When stopping the hands while they are advancing continuously, turn the crown by one revolution to the right or HR AL 24 -2 A L-1 H A L-1 C 25 left. When the continuous advance of the hands is not stopped manually, they stop automatically after advancing by 12 hours. · During the time correction, the date does not change even if the hands pass 12:00 AM. Refer to the section on "Setting the Date" for the procedure for correcting the date. Return the crown to the normal position in synchronization with a telephone time signal or other time service. [Setting the Date] The calendar function used by this watch is based on a 31-day month. The date must be changed manually from the last day of the current month to the first day of the next month by operating the crown in months having less than 31 days. Function hand Button (A) 24 18 12 TME C -2 . 0 6 . 8 . 6 . 4 . 2 (1) Date correction position HR A L-1 7 AL H A L-1 C (0) Normal position Button (B) Date R L T ME A 26 -2 27 1. (1) Turning the crown to the left causes the function hand to make four revolutions and the date to be corrected by one day. The date will not change continuously even if the crown is turned continuously. When correcting the date by several days, first check that correction of the date by one day has been completed, and then turn the crown again to correct the date by an additional day until the date is corrected for the desired number of days. Always make sure to return the crown to the normal position after correcting the date. [When Date is not in Center of Calendar Window] When the date display has shifted from the center of the calendar window as a result of the watch having been subjected to a strong impact or other reason, properly center the date in the calendar window in the chronograph mode. Pressing button (A) causes the function hand and date to move slightly. · Press button (A) several times until the number of the date is located in the center of the calendar window. · After setting the date, press button (A) several times until the function hand reaches the 0 position (12:00 position). Always make sure to return the crown to the normal position after correcting. 28 29 11. Using the Chronograph The chronograph is able to measure time up to a maximum of 59 minutes 59. 95 seconds in 1/20th second unit, after which it resets to 0 seconds. Second hand (chronograph seconds) Button (A) 24 18 12 TME C -2 . 0 6 . 8 . 6 . 4 . 2 Function hand (chronograph minutes or chronograph 1/20th seconds) R L T ME A -2 A L-1 7 Button (B) [Explanation of Hands During Chronograph Measurement] When the crown is turned and the mode hand is set to the chronograph [CHR] mode, the second hand and function hand are rapidly advanced to the 0 position (12:00 position), and the watch enters the chronograph mode. [. . . ] · Upgraded water-resistance for daily use (to 10/20 atmospheres): This type of watch may be used for skin diving; however, it is not designed for scuba or saturated diving using helium gas. · If moisture has entered the watch, or if the inside of the crystal is fogged up and does not become clear within a day, immediately take the watch to your dealer or Citizen Service Center for repair. Leaving the watch in such a state will allow corrosion to form inside. · If seawater enters the watch, place the watch in a box or plastic bag and immediately take it in for repair. Otherwise, pressure inside the watch will increase, and parts (crystal, crown, buttons, etc. ) may come off. CAUTION: CAUTION · Do NOT operate the crown or button with wet fingers or when the watch is wet. [. . . ]