User manual CHICAGO UNDERHOIST STAND WITH FOOT PEDAL

[. . . ] For future reference, please complete the owner's record below: Model______________ Serial No. _____________ Purchase Date_______________ SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly. Technical Specifications Maximum Capacity: 1, 650 Lbs. Height Range: 55" to 81-1/2" Lift: 26-1/2" Base: 11-3/4" diameter x 3/16" Overall Dimensions: 21" long x 12" O. D. [. . . ] Do not exceed this product's maximum load capacity of 1, 650 Lbs. 8. The part being adjusted must be securely supported through other means such as chains, straps and hoists. The Underhoist Stand is not designed to solely support heavy components. Make certain to place the Underhoist Stand on a dry, clean, solid level surface capable of supporting the Underhoist Stand, the vehicle and parts being hoisted, and the initial source of secure support for the vehicle parts. When using the Underhoist Stand, whenever possible, keep personnel clear of the area under the item being adjusted. Failure to heed all instructions and warnings may result in death, personal injury, and /or property damage. Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Unpacking When unpacking your Underhoist Stand with Foot Pedal, check to make sure the following parts are included. If any parts are missing or broken, please call HARBOR FREIGHT TOOLS at 1-800-444-3353. Assembly Your Underhoist Stand will require complete assembly prior to use. It is important that you read the entire manual to become familiar with the product BEFORE you assemble and use the Underhoist Stand. Before assembling and operating the Underhoist Stand be sure that you have all parts described in the Parts List and Assembly Diagram located on the last pages of this manual. Continue to screw the Threaded Post (7) down until most of the Threaded Post (7) is down inside the Metal Support-see Figure 1. Thread the Saddle (1) onto the top of the Threaded Post (7)-see Figure 1 and Figure 2. Screw in Lock Pin (2) to secure the Saddle (1) in place-see Figure 2. SKU 92258 For technical questions please call 1-800-444-3353. 5. Figure 1 Saddle (1) Figure 2 Saddle (1) Threaded Post (7) Lock Pin (2) Handle (3) Metal Support (6) 6. Insert Stop Pin (16) through Washer (20) and insert it through the Holder (19) and Metal Support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