User manual CHICAGO LOW PROFILE REAR MOTORCYCLE SPOOL STAND

[. . . ] No portion of this document or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Due to continuing improvements, actual product may differ slightly from the product described herein. [. . . ] note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. operatIon 1. If your motorcycle kick stand holds the vehicle vertically upright, you can use the kick stand. Holding the Handle (1), roll the Stand under the rear of the motorcycle. Align and engage the Left and Right Support Brackets (4 and 5) with the axle of the motorcycle. When the brackets are firmly engaged, lower the Handle (1), lifting the rear of the motorcycle. Lower the Handle all the way to the floor, which will create a support base for the vehicle. CAUTION: Do not attempt to lift the motorcycle if the Support Brackets are not fully engaged with the vehicle axle. Store this tool in a safe place. please read tHe FollowIng careFullY THe MANUFACTUReR AND/OR DISTRIBUTOR HAS PROvIDeD THe PARTS LIST AND ASSeMBLy DIAgRAM IN THIS DOCUMeNT AS A ReFeReNCe TOOL ONLy. NeITHeR THe MANUFACTUReR OR DISTRIBUTOR MAKeS ANy RePReSeNTATION OR WARRANTy OF ANy KIND TO THe BUyeR THAT He OR SHe IS qUALIFIeD TO MAKe ANy RePAIRS TO THe PRODUCT, OR THAT He OR SHe IS qUALIFIeD TO RePLACe ANy PARTS OF THe PRODUCT. IN FACT, THe MANUFACTUReR AND/OR DISTRIBUTOR exPReSSLy STATeS THAT ALL RePAIRS AND PARTS RePLACeMeNTS SHOULD Be UNDeRTAKeN By CeRTIFIeD AND LICeNSeD TeCHNICIANS, AND NOT By THe BUyeR. [. . . ] If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. [. . . ]