User manual CHICAGO 92961

[. . . ] For technical questions or replacement parts, please call 1-800-444-3353. © Revised 09i Specifications Construction Tire Size Capacity Features Dimensions Net Weight Steel Rod and Tubing most tire sizes fitting passenger car and light truck models 4 Height Settings 23-1/4" H x 10-3/4" W x2 7-1/4" L 22. 30 Lbs. This tool is ideal for breaking the beads of tires to inspect and repair the tire. The 4-dimension cam lock will press the tire open at the best angle for dismounting from the wheel. Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep the manual and invoice in a safe and dry place for future reference. Safety Warnings and Precautions WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Do not use electrically powered tools in the presence of flammable gases or liquids. [. . . ] Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. SKU 92961 Page 3 Unpacking When unpacking, check to make sure the following parts are included. 6 pieces Bead Breaker Main Components Small Parts Package including: 3-Hex Head Bolts 3-Large Wing Nuts 3-Split Lock Washers 2-Steel Pins 2-Steel Splitpins Please review Parts List and Assembly Diagram on pages 8 and 9. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual. Assembly Refer to the Assembly Drawing on page 8 while assembling. Fix the Column (6) into place using a Bolt (3), Spring Washer (4) and Wing Nut (5). Hand tighten firmly, but allow the Column (6) to rotate on the Base (1). Attach the Connecting Levers (2), as shown in the Assembly Diagram, using Bolts (3), Spring Washers (4) and Wing Nuts (5). Attach the Breaker (10) to the Handle (11) using Pin (7), Flat Washer (8) and Split Pin (9). Attach the Handle (11) to the Column (6) using Pin (7), Flat Washer (8) and Split Pin (9). 4. SKU 92961 Page 4 Operation WARNING: Tires are usually pressurized. DO NOT break the bead on any tire unless you have ensured that all pressure has been released from the tire. Use caution when breaking the bead to prevent any material in the tire from getting in your face, on equipment or otherwise injuring any person or animal or causing property damage. CAUTION: Do not force this tool if it is not compatible to the size of the tire being worked on. Lift the Handle (11) up, and place the Breaker (10) on the tire bead. NOTE: This tool has four settings for different tire widths. Adjust the Pin (7) in the slots at the top of the Column (6) as needed. Repeat this process on the reverse side of the tire to completely loosen the tire from the wheel. 5. Maintenance 1. Periodically inspect this machine for loose bolts, bent or damaged components. [. . . ] To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. [. . . ]