User manual CHICAGO 36W-110V HOT BLADE DECAL REMOVER

[. . . ] do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. do not use any adapter Page 2 impoRtant SaFetY inFoRmation in this manual, on the labeling, and all other information provided with this product: this is the safety alert symbol. obey all safety messages that follow this symbol to avoid possible injury or death. dangeR indicates a hazardous situation which, if not avoided, will result in death or serious injury. [. . . ] in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. 3. Do not lay the tool down on any flammable surface. When using a handheld power tool, maintain a firm grip on the tool with both hands. Do not leave the tool unattended when it is plugged into an electrical outlet. Turn off the tool by unplugging it from its electrical outlet before leaving. WARNING: Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. (California Health & Safety Code § 25249. 5, et seq. ) 4. 5. 6. These flammable materials may catch fire from this electric appliance. Provide adequate ventilation space on all sides of the appliance, especially near vents. Inadequate ventilation may cause fire or damage to the appliance. decal Remover Safety Warnings 1. If unreadable or missing, contact Harbor Freight Tools for a replacement. 4. 2. SKU 65057 For technical questions, please call 1-800-444-3353. Page 4 5. Keep multiple ABC class fire extinguishers nearby. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. grounded tools: tools with three prong plugs 6. SaVe tHeSe inStRuctionS. gRounding to pReVent electRic SHocK and deatH FRom incoRRect gRounding WiRe connection: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. if the plug will not fit the outlet, have a proper outlet installed by a qualified electrician. 1. Tools marked with "Grounding Required" have a three wire cord and three prong grounding plug. If the tool should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user, reducing the risk of electric shock. (See 3-prong plug and outlet. ) The grounding prong in the plug is connected through the green wire inside the cord to the grounding system in the tool. The green wire in the cord must be the only wire connected to the tool's grounding system and must never be attached to an electrically "live" terminal. (See 3-prong plug and outlet. ) The tool must be plugged into an appropriate outlet, properly installed and grounded in accordance with all codes and ordinances. The plug and outlet should look like those in the preceding illustration. [. . . ] to pReVent SeRiouS injuRY FRom accidental opeRation: unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. to pReVent SeRiouS injuRY FRom tool FailuRe: do not use damaged equipment. if abnormal noise or heating occurs, have the problem corrected before further use. be replaced only by a qualified service technician. cleaning and maintenance 1. Check for loose screws, misalignment or binding of parts, cracked or broken parts, damaged electrical wiring, and any other condition that may affect its safe operation. [. . . ]