User manual CARROM SUPER STICK HOCKEY

[. . . ] Carefully pick up the machine and place it on top of the Optional Paper Tray (Lower Tray). Document Support To prevent damage to the drum, do not expose it to light for longer than a few minutes. To select which tray will be used for faxes or for copies, see Lower Tray (With Optional Paper Tray Only) and for printer setting, see Paper Source in Owner’s Manual. If you move the machine after connecting the Lower Tray, be sure to carefully lift the Lower Tray with the machine because they are not attached. Document Tray with Extension E. Adjust the paper guides at the right and rear of the paper cassette for the paper size you want. [. . . ] Slide the paper cassette into the machine until it locks into place. Install Mains Power Cord and Telephone Line Cord 7 (Example for the U. K. ) Sharing a Single Line with a Telephone Answering Device (TAD) or an External Telephone TAD TAD Maximum Paper Height Guide Mains Power Cord Telephone Line Cord (Example for the U. K. ) External Telephone Extension Telephone Do Not connect the Parallel or USB Cable. 8 Fax TAD F/T Selecting Receive Mode 9 Set Date and Time 1 10 Set Station ID 1 Choose the mode that best suits your needs by pressing Mode repeatedly until you have changed the Fax and F/T lights to the setting you want to use. The machine answers every call and receives a fax or pseudo rings for you to pick up a voice call. Press Menu, , 2 . 1. DATE/TIME YEAR:XX ENTER & SET KEY 2. STATION ID FAX: ENTER & SET KEY B. Enter the last two digits of the year and press Set. MONTH:XX ENTER & SET KEY B. Enter your fax number, then press Set. TEL: ENTER & SET KEY Fax TAD F/T C. Enter your telephone number, then press Set. NAME: ENTER & SET KEY C. Enter two digits for the month and press Set. DAY:XX ENTER & SET KEY Fax TAD F/T D. Enter two digits for the day and press Set. TIME:XX:XX ENTER & SET KEY D. Enter your name using the dial pad and the chart twice to create below, then press Set. Press blank space. Press Key 2 3 4 5 6 7 8 9 once A D G J M P T W twice B E H K N Q U X three times four times five times C F I L O R V Y 2 3 4 5 6 S 8 Z A D G J M 7 T 9 E. See AutoLoad the Brother Control Centre, Chapter 13 in the Owner’s Manual on the CD-ROM. Step 4. A. B. Connect the MFC to your PC with Parallel Cable. Connect the parallel interface cable to the parallel interface port of the MFC and secure the wire clips. Connect the interface cable to the printer port of the computer and secure it with the two screws. For the location of your computer’s parallel printer port, see the User’s Guide for your computer. For Parallel interface cable users Step 5. Follow the instructions on the screen. ( For Windows® 2000 Professional User ) ( For Windows® 95/98/98SE/Me Users ) 1. In the Connect Cable window, click Next. 2. When the above screen appears, click Finish and wait as the PC restarts Windows® and continues the installation. 1. In the Connect Cable window, click Next. 2. When the above screen appears, Click Finish and wait as the PC restarts Windows® and continues the installation. 3. Click Yes to have the Control Centre loaded each time Windows® is started. Please see Note *3. The Brother PC fax, Printer and Scanner drivers have been installed and the installation is now complete. 3. When the Digital Signature Not Found dialog boxes appear, click Yes to install the driver. 4. Click Yes to have the Control Centre loaded each time Windows® is started. Please see Note *3. The Brother PC fax, Printer and Scanner drivers have been installed and the installation is now complete. Step 4. Step 5. Turn on the MFC by plugging in the power cord. Connect the MFC to your PC with the USB cable (it will take a few seconds for the installation screen to appear). Follow the instructions on the screen. ( For Windows® 98/98SE/Me Users ) ( For Windows® 2000 Users ) Step 6. For USB interface cable users 1. In the Add Printer Wizard window, select BRUSB: USB Printer Port, and then click Next. 2. Accept the default Printer name by selecting Yes, and then click Next. 3. Select Yes (recommended), and then click Finish. A test page will be printed so you can check the print quality. 1. When the Digital Signature Not Found dialog boxes appear, click Yes to install the driver. 4. If the test page is printed correctly, click Yes. [. . . ] A test page will be printed so you can check the print quality. 1. When the Digital Signature Not Found dialog boxes appear, click Yes to install the driver. 4. If the test page is printed correctly, click Yes. If you click No, follow the prompts on the screen to correct the problem. 5. Select Yes to restart your computer, and then click Finish. 6. Click Yes to have the Control Centre loaded each time Windows® is started. Please see Note *3. 2. Select Finish to restart your computer. 3. Click Yes to have the Control Centre loaded each time Windows® is started. Please see Note *3. The Brother PC fax, Printer and Scanner drivers have been installed and the installation is now complete. The Brother PC fax, Printer and Scanner drivers have been installed and the installation is now complete. –3– For Windows NT® Workstation Version 4. 0 Users Step 1. Check that your computer is turned on. Step 3. [. . . ]