User manual CARROM SUPER SOCCER

[. . . ] Press MACH. , MANUAL mode, and press Menu/Set. FAX ONLY 1. DATE/TIME YEAR:XX ENTER & SET KEY 2. STATION ID FAX: ENTER & SET KEY For use with a dedicated fax line. Enter the last two digits of the year and press Menu/Set. MONTH:XX ENTER & SET KEY B. Enter your fax number, then press Menu/Set. TEL: ENTER & SET KEY C. Enter your telephone number, then press Menu/Set. NAME: ENTER & SET KEY For receiving fax and voice calls on one line. [. . . ] The machine answers every call and receives a fax or pseudo rings for you to pick up a voice call. TAD:ANSWER MACH. C. Enter two digits for the month and press Menu/Set. DAY:XX ENTER & SET KEY For use with an external answering device. Enter two digits for the day and press Menu/Set. TIME:XX:XX ENTER & SET KEY D. Enter your name using the dial pad and the chart below, then press Menu/Set. For more details, see Entering Text in Owner’s Manual. Press Key 2 3 4 5 6 7 8 9 once A D G J M P T W twice B E H K N Q U X three times four times five times C F I L O R V Y 2 3 4 5 6 S 8 Z A D G J M 7 T 9 E. Note: If you can’t step forward, press Stop/Exit and repeat from Step A. –1– You control the phone line and must answer every call yourself. For more details, see Receive Mode Settings in Owner’s Manual. Note: If you can’t step forward, press Stop/Exit and repeat from Step A. Version A Setting Up the MFC and PC to Work Together Before You begin • • You must set up the hardware and install the Brother Drivers before you can use your MFC as a printer and scanner in any Windows® application. Connect the interface cable to the printer port of the computer and secure it with the two screws. For the location of your computer’s parallel printer port, see the User’s Guide for your computer. For Parallel interface cable users Step 5. Follow the instructions on the screen. ( For Windows® 2000 Professional User ) ( For Windows® 95/98/98SE/Me Users ) 1. In the Connect Cable window, click Next. 2. When the above screen appears, click Finish and wait as the PC restarts Windows® and continues the installation. 1. In the Connect Cable window, click Next. 2. When the above screen appears, Click Finish and wait as the PC restarts Windows® and continues the installation. 3. Click Yes to have the Control Centre loaded each time Windows® is started. Please see Note*3. The Brother PC fax, Printer and Scanner drivers have been installed and the installation is now complete. 3. When the Digital Signature Not Found dialog boxes appear, click Yes to install the driver. 4. Click Yes to have the Control Centre loaded each time Windows® is started. Please see Note*3. The Brother PC fax, Printer and Scanner drivers have been installed and the installation is now complete. Step 4. Step 5. Step 6. For USB interface cable users Turn the MFC power switch ON. Connect the Filter Core and Cable Tie to the USB cable, and then connect the MFC to your PC with the USB cable. (It will take a few seconds for the installation screen to appear. ) The installation of the Brother driver will automatically start. Follow the instructions on the screen. ( For Windows® 98/98SE/Me Users ) ( For Windows® 2000 Users ) 1. In the Add Printer Wizard window, select BRUSB: USB Printer Port, and then click Next. 2. Accept the default Printer name by selecting Yes, and then click Next. 3. Select Yes (recommended), and then click Finish. [. . . ] (It will take a few seconds for the installation screen to appear. ) The installation of the Brother driver will automatically start. Follow the instructions on the screen. ( For Windows® 98/98SE/Me Users ) ( For Windows® 2000 Users ) 1. In the Add Printer Wizard window, select BRUSB: USB Printer Port, and then click Next. 2. Accept the default Printer name by selecting Yes, and then click Next. 3. Select Yes (recommended), and then click Finish. A test page will be printed so you can check the print quality. 1. When the Digital Signature Not Found dialog boxes appear, click Yes to install the driver. 4. If the test page is printed correctly, click Yes. If you click No, follow the prompts on the screen to correct the problem. 5. Select Yes to restart your computer, and then click Finish. 6. Click Yes to have the Control Centre loaded each time Windows® is started. [. . . ]